Measurement Of Angles On Holes/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "{{TutorialInfo/fr |Topic=TechDraw |Level=Base |Time=1 minute |Author=AnHi |FCVersion=0.19 }}")
(Created page with "Ce didacticiel explique comment créer des lignes de perçage centrales à l'aide de l'atelier TechDraw Image:Workbench_TechDraw.svg|24px|link=Tech...")
Line 11: Line 11:
== Introduction ==
== Introduction ==


This tutorial explains how to create center hole lines using the [[Image:Workbench_TechDraw.svg|24px|link=TechDraw_Workbench]] [[TechDraw Workbench]] with oriented holes.
Ce didacticiel explique comment créer des lignes de perçage centrales à l'aide de l'[[TechDraw Workbench/fr|atelier TechDraw]] [[Image:Workbench_TechDraw.svg|24px|link=TechDraw_Workbench/fr]] avec des trous orientés.


By creating angles for holes it's not possible to use vertical or horizontal center lines (false/true) from the properties of the view. Helping lines and/or helping points are created for this necessity.
By creating angles for holes it's not possible to use vertical or horizontal center lines (false/true) from the properties of the view. Helping lines and/or helping points are created for this necessity.

Revision as of 09:16, 9 April 2020

Other languages:
Tutoriel
Thème
TechDraw
Niveau
Base
Temps d'exécution estimé
1 minute
Auteurs
AnHi
Version de FreeCAD
0.19
Fichiers exemples
None
Voir aussi
None

Introduction

Ce didacticiel explique comment créer des lignes de perçage centrales à l'aide de l'atelier TechDraw avec des trous orientés.

By creating angles for holes it's not possible to use vertical or horizontal center lines (false/true) from the properties of the view. Helping lines and/or helping points are created for this necessity.

Processus

1.Setting center lines on holes:

There are some possibilities to create a center line for holes. At first the lines or points on the hole must be selected as shown below. The following tools can be used from the toolbar to create the center line:

Ajouter une ligne centrale entre 2 Points
Ajouter une ligne centrale entre 2 Lignes

Above: created with TechDraw_2PointCenterLine which creates centerlines between 2 points

Above: created with TechDraw_2LineCenterLine which creates centerlines between 2 lines


Template:Tutorials navi/fr