FEM Vitesse d'écoulement comme condition limite

From FreeCAD Documentation
Revision as of 14:22, 30 May 2020 by David69 (talk | contribs) (Created page with "# Cliquez sur 32x32px ou choisissez '''Model''' → '''Fluid Constraints''' → {{KEY|Image:Fem-constraint-flow-velocity.svg|32x...")
Other languages:

FEM Contrainte de vitesse d'écoulement

Emplacement du menu
Model → Fluid constraints → Constraint flow velocity
Ateliers
FEM
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Tutoriel FEM

Description

Applique une condition aux limites de vitesse d'écoulement à une face en 3D ou à une arête en 2D.

Utilisation

  1. Cliquez sur ou choisissez ModelFluid Constraints Constraint flow velocity dans le menu supérieur
  2. Le panneau des tâches pour la vitesse d'écoulement de contrainte apparaît
  3. Sélectionnez les arêtes ou faces cibles
  4. Cliquez sur Add
  5. Décochez "unspecified" pour activer les champs nécessaires à l'édition
  6. Remplissez les valeurs en mm/s pour les principaux composants cartésiens


Notes

  • Vector components that are ticked as "unspecified" will be interpolated by the selected solver.
    • Any vector that should be the result of the solver must be ticked as "unspecified".
  • If the target face or edge is not aligned with the main cartesian coordinate system, it is possible to tick "normal to boundary".
    • If "normal to boundary" is ticked, the normal vector to the selected edge or face is X and it will be oriented away from the mesh domain.
      • For example, if a flow of 20 mm/s of air must enter the domain, then after ticking "normal to boundary" the user will have to input -20 mm/s in the "velocity X" field.