FEM ConstraintCurrentDensity/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "# Appuyez sur le bouton {{Button|16px Contrainte de densité de courant}} ou utilisez le menu {{MenuCommande|Modèle → Contraintes électromagnétiques → 16px Contrainte de densité de courant}}. # Dans la Vue 3D, sélectionnez l'objet auquel la contrainte doit être appliquée. # Appuyez sur le bouton {{Button|Ajouter}}.")
(Created page with "==Options==")
Line 30: Line 30:
# Appuyez sur le bouton {{Button|Ajouter}}.
# Appuyez sur le bouton {{Button|Ajouter}}.


<div lang="en" dir="ltr" class="mw-content-ltr">
==Options==
==Options==
</div>


<div lang="en" dir="ltr" class="mw-content-ltr">
<div lang="en" dir="ltr" class="mw-content-ltr">

Revision as of 18:48, 16 February 2023

Other languages:

FEM Contrainte de densité de courant

Emplacement du menu
Modèle → Contraintes électromagnétiques → Contrainte de densité de courant
Ateliers
FEM
Raccourci par défaut
Aucun
Introduit dans la version
1.0
Voir aussi
FEM Équation magnétodynamique, FEM Équation magnétodynamique 2D

Description

Crée une contrainte FEM pour la densité de courant. A utiliser avec les équations magnétodynamique, magnétodynamique 2D

Utilisation

  1. Appuyez sur le bouton Contrainte de densité de courant ou utilisez le menu Template:MenuCommande.
  2. Dans la Vue 3D, sélectionnez l'objet auquel la contrainte doit être appliquée.
  3. Appuyez sur le bouton Ajouter.

Options

  • Current density_*_1: The real/imaginary part of the current density in x-direction in A/m².
    For other coordinate systems than Cartesian 3D, this will be the first coordinate of the system instead of x.
  • Current density_*_2: The real/imaginary part of the current density in y-direction in A/m².
    For other coordinate systems than Cartesian 3D, this will be the second coordinate of the system instead of y.
  • Current density_*_3: The real/imaginary part of the current density in z-direction in A/m².
    For other coordinate systems than Cartesian 3D, this will be the third coordinate of the system instead of z. If the coordinate system has no third coordinate, this setting will be ignored.
  • Current density_*_*_Disabled: Whether the corresponding parameter is disabled (assumed as unknown by the solver).