Atelier CurvedShapes

From FreeCAD Documentation
Revision as of 10:32, 1 May 2020 by David69 (talk | contribs) (Created page with "== Présentation ==")
Other languages:

Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.

Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.

Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.

L'icône de l'atelier externe CurvedShapes

Présentation

Curved Shapes is a FreeCAD external workbench that creates 3D shapes from 2D curves.

Installation

Recommended installation is through the FreeCAD Addon Manager via the Tools → Addon Manager

Note: for manual installation see Addon Manager#Manual_installation

Tools

  • CurvedArray: Creates an array and resizes the items in the bounds of one or more hull curves.
  • CurvedSegment: Interpolates between two 2D curves. The interpolated curves can be resized in the bounds of some hullcurves.
  • InterpolatedMiddle: Interpolates a 2D shape into the middle between two 2D curves. The base shapes can be connected to a shape with a sharp corner.
  • SurfaceCut: Cuts a surface to get the outline curve or a face. This tool is similar to Cross-Sections in the Part workbench, but it is fully parametric and has an option to reduce the complexity of the output curve. It tries to remove overlapping edges.

Examples

References

Related

External Workbenches