CAM Simulator/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/it|Name=Path Simulator|Name/it=Simulatore|Workbenches=Path|MenuLocation=Path → Simulatore CAM|SeeAlso=Ispeziona }}")
(Created page with "==Descrizione==")
Line 1: Line 1:
{{GuiCommand/it|Name=Path Simulator|Name/it=Simulatore|Workbenches=[[Path Workbench/it|Path]]|MenuLocation=Path → Simulatore CAM|SeeAlso=[[Path_Inspect/it|Ispeziona]] }}
{{GuiCommand/it|Name=Path Simulator|Name/it=Simulatore|Workbenches=[[Path Workbench/it|Path]]|MenuLocation=Path → Simulatore CAM|SeeAlso=[[Path_Inspect/it|Ispeziona]] }}


==Description==
==Descrizione==


This tool allows Simulation of the Path Job by sweeping 3D Models of the Tools used in each Operation, along the G-Code paths, subtracting material from the Stock, where the stock and tool overlap, providing visualization of the Job. This allows detection and isolation of errors prior to running the Job on a mill.
This tool allows Simulation of the Path Job by sweeping 3D Models of the Tools used in each Operation, along the G-Code paths, subtracting material from the Stock, where the stock and tool overlap, providing visualization of the Job. This allows detection and isolation of errors prior to running the Job on a mill.

Revision as of 17:36, 30 January 2018

Simulatore

Posizione nel menu
Path → Simulatore CAM
Ambiente
Path
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Ispeziona

Descrizione

This tool allows Simulation of the Path Job by sweeping 3D Models of the Tools used in each Operation, along the G-Code paths, subtracting material from the Stock, where the stock and tool overlap, providing visualization of the Job. This allows detection and isolation of errors prior to running the Job on a mill.

Usage

  1. Press the CAM Simulator button
  2. De-select any Operations that are not to be simulated
  3. Tune the Speed and Accuracy settings.
  4. Select the Job for simulation from the drop menu.
  5. Press Play button to or play back an animation of the operations.
    Press the Fast Forward button to make it really fast even for complicated paths.
  6. Pause, and Single-Step functionality is provided for resolving specific cuts or movements.
  7. Clicking the Cancel button will remove the stock created for the simulation. If you click Ok this object will be kept in your Job.

Properties

  1. need usage
  • DatiPlayback Speed: The speed of the simulation playback, in G-Code lines/second
  • DatiAccuracy: The accuracy of the simulation expressed as a percentage indicating the simulations deviation from the Job. For interactive simulation, reducing accuracy to 0.3 works much faster.
  • DatiJob: The Job used as the basis of the simulation
  • DatiOperation List: The list of Operations selected for inclusion in the simulation.


  • need options