Manual:Navigare în vizualizarea 3D
- Introducere
- Descoperind FreeCAD
- Lucrul cu FreeCAD
- Programarea prin script Python
- Comunitatea
Despre spațiul 3D
Dacă acesta este primul dvs. contact cu o aplicație 3D, va trebui să înțelegeți mai întâi câteva concepte. Dacă nu este primul contact, puteți sări peste această secțiune.
Spațiul FreeCAD 3D este un spațiu euclidian Euclidean space. Este un punct de origine și trei axe: X, Y și Z. Dacă vă uitați la scena dvs. de sus, în mod convențional, axa X indică spre dreapta, axa Y spre spate și axa Z în sus. În colțul din dreapta jos al vizualizării FreeCAD, vizionați mereu scena:
Fiecare punct al fiecărui obiect care există în acest spațiu poate fi localizat prin coordonatele sale (x, y, z). De exemplu, un punct cu coordonate (2, 3, 1), se va situa la 2 unități pe axa X, 3 unități pe axa Y și 1 unitate pe axa Z:
Puteți privi acea scenă din orice unghi, ca și cum ați ține o cameră foto. Această cameră poate fi mișcată în stânga, în dreapta, în sus și în jos (pan), rotită în jurul a ceea ce priviți(rotate) și apropită și îndepărtată de scenă (zoom).
The FreeCAD 3D view
Navigating in the FreeCAD 3D view can be done with a mouse, a Space Navigator device, the keyboard, a touchpad, or a combination of those. FreeCAD implements several navigation modes, which determine how the three basic view manipulation operations (pan, rotate and zoom) are done, as well as how to select objects on the screen are performed. Navigation modes are accessed from the Preferences screen, or directly by right-clicking anywhere on the 3D view:
Each of these modes allocate different mouse buttons, or mouse + keyboard combinations, or mouse gestures, to these four operations. The following table shows the principal available modes:
Mode | Pan | Rotate | Zoom | Select |
---|---|---|---|---|
OpenInventor | hold CTRL + drag | |||
CAD (default) | or | or | or | |
Blender | hold SHIFT + drag or drag | |||
Touchpad | hold SHIFT + drag | ALT + | PGUP / PGDOWN | |
Gesture | drag | drag | ||
OpenCascade |
Alternatively, some keyboard controls are always available, no matter the navigation mode:
- CTRL + and CTRL - to zoom in and zoom out
- The arrow keys to shift the view left/right and up/down
- SHIFT + left arrow and SHIFT + right arrow to rotate the view by 90 degrees
- the numeric keys, 1 to 6, for the six standard views, top, front, right, bottom, back and left
- O will set the camera in orthographic mode,
- while P sets it in perspective mode.
- CTRL will allow you to select more than one object or element
These controls are also available from the View menu and some from the View toolbar.
Selecting objects
Objects in the 3D view can be selected by clicking them with the corresponding mouse button, depending on the navigation mode. A single click will select the object, and one of its subcomponents (edge, face, vertex). Double-clicking will select the object, and all its subcomponents. You can select more than one subcomponent, or even different subcomponents from different objects, by pressing the CTRL key. Clicking with the selection button on an empty portion of the 3D view will deselect everything.
A panel called "Selection view", available from the View menu, can also be turned on, which shows you what is currently selected:
You can also use the Selection View to select objects by searching for a particular object.
Read more