Assembly3 Contrainte diamètre

From FreeCAD Documentation
Revision as of 09:48, 25 September 2021 by David69 (talk | contribs) (Created page with "{{Docnav/fr |Contrainte milieu |Contrainte rayon |Assembly3 |IconL=Assemb...")

Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.

Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.

Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.
Other languages:

Assembly3 ConstraintDiameter

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

The Diameter command constrains the diameter of a 2D circle or arc which is made with Draft Workbench tools in relation with a workplane.

To set the diameter edit the Diameter parameter in the properties panel.

Usage

  1. Select a 2D circle or arc
  2. Activate the Diameter command using the:
  3. Set the Diameter value in the (constraint's) properties panel.
  4. Press the Solve constraints or the Quick solve button to recompute
(if Auto recompute and Smart recompute are disabled).