Złożenie 3: Wiązanie średnicy

From FreeCAD Documentation
This page is a translated version of the page Assembly3 ConstraintDiameter and the translation is 11% complete.

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Other languages:

Assembly3 ConstraintDiameter

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

The Diameter command constrains the diameter of a 2D circle or arc which is made with Draft Workbench tools in relation with a workplane.

To set the diameter edit the Diameter parameter in the properties panel.

Usage

  1. Select a 2D circle or arc
  2. Activate the Diameter command using the:
  3. Set the Diameter value in the (constraint's) properties panel.
  4. Press the Solve constraints or the Quick solve button to recompute
(if Auto recompute and Smart recompute are disabled).