SheetMetal AddRelief
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
SheetMetal Relief |
Menu location |
---|
SheetMetal → Relief |
Workbenches |
SheetMetal |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
Usage
To add relief to corner of bend:
- Start with a base plate or sheet, select a corner vertex to apply relief
- Click on the Relief tool to add relief cut to corner.
Note: The workbench does not have a tool to create a base plate, so you need to start your model with one of the following methods:
- Method 1: Part Cube
- Method 2: An extruded solid made with Part Extrude from either a:
- Draft Rectangle or a
- Draft Wire or a
- Sketch
- Use Part Thickness to create shell (Typically with the thickness value of the sheet metal.)
- Method 3: PartDesign Body containing either an
- additive box or a
- PartDesign Pad made from a Sketch.
- Use PartDesign Thickness to create shell (Typically with the thickness value of the sheet metal.)
Properties
Data
Base
- DataLabel: User name of the object in the Tree view.
Parameters
- Datarelief: Size of relief to be added.
View
The parameter descriptions of the View tab will be found in Property editor, further below at Example of the properties of a PartDesign object.
Notes
Limitations
Limitation are not known yet.