Skicář Konstrukční mód

From FreeCAD Documentation
Revision as of 06:25, 13 March 2014 by Honza32 (talk | contribs) (Created page with "{{GuiCommand/cs|Name=Sketcher AlterConstruction|Name/cs= Změna konst.módu|Workbenches=Náčrt, Návrh dílu|MenuLocatio...")

Změna konst.módu

Umístění Menu
Náčrt → Náčrt Konstrukce → Změna konst.módu
Pracovní stoly
Náčrt, Návrh dílu
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Nikdo

Popis

Tento nástroj přehazuje náčrt konstrukce do a z konstrukčního módu. Může to být použito na jakýkoliv typ konstrukce: přímka, oblouk nebo kružnice.

Construction geometry is an important tool of the sketcher. When using a sketch for a 3D operation, construction geometry is ignored.

In sketch edit mode, construction geometry is shown as blue, and won't turn green when a sketch is fully constrained. Once you exit the sketch mode, construction geometry is hidden on the screen.

Note: starting with v0.13, construction lines can be used as rotation axis by the PartDesign Revolve feature.

Usage

  • Select one or more sketch geometry in the 3D view, then click on the tool or access it in the menu.