PartDesign Pană substractivă
PartDesign SubtractiveWedge |
Menu location |
---|
Part Design → Create a subtractive primitive → Subtractive Wedge |
Workbenches |
PartDesign |
Default shortcut |
None |
Introduced in version |
- |
See also |
PartDesign CompPrimitiveSubtractive |
Descriere
Se introduce în pană subtractivă în corpul activ. Forma sa este scăzută de solidul existent.
On the left: active body (A) shown in grey and subtractive wedge (B) shown in transparent red; result on the right.
Cum se folosește
- Press the Subtractive Wedge button. Note: the Subtractive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Subtractive Wedge in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- A Wedge feature appears under the active Body.
Opţiuni
The Wedge can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Proprietăți
Using the default placement, the below inputs are:
- DateX min/max : Base face X axis span
- DateY min/max: Wedge height span
- DateZ min/max : Base face Z axis span
- DateX2 min/max : Top face X axis span
- DateZ2 min/max : Top face Z axis span