Assembly3 Contrainte égalité longueur d'arc
Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.
Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.
Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.
Assembly3 Contrainte égalité longueur d'arc |
Emplacement du menu |
---|
Aucun |
Ateliers |
Assembly3 |
Raccourci par défaut |
Aucun |
Introduit dans la version |
- |
Voir aussi |
Aucun |
Description
The Equal Line Arc Length command constrains the length of a 2D line like a non-subdivided wire which is made with Draft Workbench tools in relation with a workplane.
It links the length of the 2D line with the length of an arc (2D or 3D?).
The length value of the selected line equals the length of selected arc.
Since I couldn't get this tool working here's the statement of the tool tip:
Add an "EqualLineArcLength" constraint to make a line of the same length as an arc.
Usage
- Select the 2D line to be constrained.
- Select a 2D arc to read its length value.
- Activate the Equal Line Arc Length command using the:
- Equal Line Arc Length button.
- Press the Solve constraints or the Quick solve button to recompute
- (if Auto recompute and Smart recompute are disabled).
Depending on the order of the selected line types following errors appear:
Constraint "EqualLineArcLength" requires the 1st element to be a linear edge Constraint "EqualLineArcLength" requires the 2nd element to be an arc edge Constraint "EqualLineArcLength" requires the 2nd element to be a circular edge
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test