Translations:Workarounds/104/en

From FreeCAD Documentation

|- | 10 | Modify regular and section views using sketching tools |

  • Manually create and modify the views:
    1. If a section view has to be modified, use the Part SectionCut tool or boolean operations to cut the part in the same way as it would be done by the section view tool
    2. Use the Draft Shape2DView tool to create a 2D line representation of the view or section view
    3. Use the Drafting tools with proper snaps to modify the view
    4. Use the Draft Draft2Sketch tool to create a sketch out of the Draft objects
    5. Use the Sketcher ValidateSketch tool to make sure that the sketch has no missing coincidences, doubled lines and so on (those issues may impact the face selection in TechDraw)
    6. Use the TechDraw View tool to create a view of the sketch in TechDraw.