Translations:PartDesign Chamfer/7/fr: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
 
Line 1: Line 1:
* Le PartDesign Chanfrein ne doit pas être confondu avec le [[Part_Chamfer/fr|Part Chanfrein]]. À moins que vous ne sachiez ce que vous faites, [[Part_Chamfer/fr|Part Chanfrein]] ne doit pas être utilisé sur un corps PartDesign. Voir [[Part_and_PartDesign/fr|Part et PartDesign]].
* Le PartDesign Chanfrein ne doit pas être confondu avec le [[Part_Chamfer/fr|Part Chanfrein]]. À moins que vous ne sachiez ce que vous faites, [[Part_Chamfer/fr|Part Chanfrein]] ne doit pas être utilisé sur un corps PartDesign. Voir [[Part_and_PartDesign/fr|Part et PartDesign]].
* Les chanfreins ne peuvent pas entièrement épouser les faces adjacentes.

Latest revision as of 17:34, 12 March 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (PartDesign Chamfer)
* PartDesign Chamfer should not be confused with [[Part_Chamfer|Part Chamfer]]. Unless you know what you are doing, [[Part_Chamfer|Part Chamfer]] should not be used on a PartDesign Body. See [[Part_and_PartDesign|Part and PartDesign]].
* Chamfers cannot completely consume the adjacent faces.
  • Le PartDesign Chanfrein ne doit pas être confondu avec le Part Chanfrein. À moins que vous ne sachiez ce que vous faites, Part Chanfrein ne doit pas être utilisé sur un corps PartDesign. Voir Part et PartDesign.
  • Les chanfreins ne peuvent pas entièrement épouser les faces adjacentes.