Sketcher ReorientSketch/cs: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 14: Line 14:
=== Note ===
=== Note ===
* When selecting {{KEY| Cancel}} in the second menu the sketch is simply detached from its face.
* When selecting {{KEY| Cancel}} in the second menu the sketch is simply detached from its face.
* If there are no one sketch selected the command is greyed out.
* As long as no sketch is selected, the command is greyed out.


{{clear}}
{{clear}}

Revision as of 06:27, 5 April 2016

Skicář Změna orientace

Umístění Menu
Návrh dílu → Změna orientace náčrtu
Pracovní stoly
Skicář, Návrh dílu
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Vyznač náčrt, Nový náčrt

Description

Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset).

Use

  1. Select the sketch to be re-oriented in the tree-view
  2. Choose Sketch Reorient sketch from the top menu
  3. A menu will pop up and ask you if you want to detach the sketch from its face
  4. Selecting Yes will give you the same menu as in Sketch New Sketch
  5. You can attach the sketch to one of the main planes
  6. You also have the possibility to add a positive or negative offset

Note

  • When selecting Cancel in the second menu the sketch is simply detached from its face.
  • As long as no sketch is selected, the command is greyed out.