Sketcher ConstrainParallel/ru: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 27: Line 27:


The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.
The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.

[[Category:Sketcher]]

Revision as of 23:25, 25 November 2018

Constraint Parallel

Системное название
Constraint Parallel
Расположение в меню
Sketch → Ограничения эскиза → Ограничение параллельности
Верстаки
Sketcher, PartDesign
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Ограничение вертикальности, Ограничение горизонтальности

Description

The Constrain Parallel constraint forces two selected straight lines or edges to be parallel to each other.

Operation

The sketch contains two randomly oriented lines.

Select both lines by clicking successively on each of them.

Apply the Constrain Parallel constraint by selecting the Constrain Parallel icon from the Sketcher constraints toolbar or by selecting the Constraint Parallel menu item from the Sketcher constraints sub menu of the Sketcher (Sketcher workbench selected) or Part Design (Part Design workbench selected) menu item.

The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.