Croquizador RestringirIgual
Constraint EqualLength |
Ubicación en el Menú |
---|
Croquizador → Restricciones del Croquizador → Igual |
Entornos de trabajo |
Croquizador, Diseño de Piezas |
Atajo de teclado por defecto |
Ninguno |
Introducido en versión |
- |
Ver también |
Radio |
Descripción
La restricción Igual fuerza que dos o más segmentos de línea en una línea, polilínea o rectángulo tengan la misma longitud. Si se aplica sobre arcos o circunferencias el radio se restringe para que sea igual. No puede aplicarse sobre geometría que no sea del mismo tipo (por ejemplo segmentos de línea y arcos).
Operation
The example sketch below contains a number of sketch primitives ( line,poly-line, rectangle, arc and circle).
Select two or more line segments (e.g. line and one side of the rectangle).
Click on the Constrain Equal icon in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.
Now select the arc and the circle in the sketch.
and apply the Constrain Equal constraint as before.
Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle
and apply the Constrain Equal constraint as before.
Select the line segment and the arc
and apply the Constrain Equal constraint as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).