Ship CreateShip/ro: Difference between revisions
(Created page with "=== Date despre nava === Dimensiunile principale trebuie introduse aici: * Lungime: Lungime între perpendiculare, 25,5 m pentru această navă. * Lățimea: Lățimea totală...") |
(Created page with "De obicei, lungimea dintre perpendiculare depinde de schița proiectului, deci dacă nu știți care este lungimea navei dvs. puteți seta schița și potriviți lungimea pent...") |
||
Line 29: | Line 29: | ||
De obicei, lungimea dintre perpendiculare depinde de schița proiectului, deci dacă nu știți care este lungimea navei dvs. puteți seta schița și potriviți lungimea pentru a obține arcul și cursa intersecție. |
|||
Usually the Length between perpendiculars depends on design draft, so if you don't know what is the length of your ship you can set draft, and fit length in order to get bow and draft intersection. |
|||
Revision as of 09:38, 4 October 2018
Ship New |
Menu location |
---|
Ship design → Create a new ship |
Workbenches |
Ship |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Introducere
De făcut
In order to create a Ship instance select s60 geometry and execute the ship creation tool (Ship design → Create a new ship).
Creating ship task dialogue and some annotations at 3D view will shown. The annotations will removed when you close Ship creation tool, so don't worry about this.
Most relevant ship data must be introduced (Ship uses a progressive data introduction system, so basic operations can be performed knowing only basic ship data, more information is needed as the operations become more complex).
Dimensiunile principale trebuie introduse aici:
- Lungime: Lungime între perpendiculare, 25,5 m pentru această navă.
- Lățimea: Lățimea totală a navei, 3,389 m pentru această navă.
- Schiță: Pescajul proiectat, 1,0 m pentru această navă.
De obicei, lungimea dintre perpendiculare depinde de schița proiectului, deci dacă nu știți care este lungimea navei dvs. puteți seta schița și potriviți lungimea pentru a obține arcul și cursa intersecție.
Same process is valid for Beam fit. Note that requested value is total beam, but annotation is only refered to starboard half ship.
When you press Accept button program creates your new Ship instance called Ship at Tags & Attributes dialog. We don't need geometry anymore, so you can hide it.
From here onwards, you must have Ship selected before you execute any Ship tool.
Tutorials