Arkusz Blachy: Rozwiń
Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.
Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.
Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.
SheetMetal Unfold |
Menu location |
---|
SheetMetal → Unfold |
Workbenches |
SheetMetal |
Default shortcut |
U |
Introduced in version |
- |
See also |
SheetMetal UnattendedUnfold |
Description
The SheetMetal Unfold command unfolds a sheet metal object.
Usage
- Select a planar face of the sheet metal part.
- Activate the Unfold command using one of the following:
- Adjust unfolding options in the task panel by:
- Selecting the projection options of the unfold sketch.
- Selecting the method of bend deduction with K-factor:
- Use a Material Definition Sheet.
- Select a manual K-factor then the ANSI or DIN standard to apply
Properties
See also: Property editor.
A SheetMetal Unfold object is derived from a Part Feature object and inherits all its properties. It has no additional properties, but its label has a default value:
Data
Base
- DANELabel (
String
): Default value:Unfold
(+ a sequential number for second and following items).
The user editable name of this object, it may be any arbitrary UTF8 string.
Limitations
- Sheet metal should have constant thickness
- Flat faces should be planar with no split lines
- Bend angles should be radius with cylindrical faces
- Unfold feature is not parametric at the moment.