SheetMetal Unfold/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Opis==")
(Created page with "Polecenie 24px '''Rozwiń''' rozkłada obiekt z blachy.")
Line 23: Line 23:
==Opis==
==Opis==


The [[Image:SheetMetal_Unfold.svg|24px]] '''SheetMetal Unfold''' command unfolds a sheet metal object.
Polecenie [[Image:SheetMetal_Unfold.svg|24px]] '''Rozwiń''' rozkłada obiekt z blachy.


==Usage==
<span id="Usage"></span>
==Użycie==


# Select a planar face of the sheet metal part.
# Select a planar face of the sheet metal part.

Revision as of 16:33, 8 October 2023

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Other languages:

Arkusz Blachy: Rozwiń

Lokalizacja w menu
SheetMetal → Rozwiń
Środowisko pracy
Arkusz Blachy
Domyślny skrót
U
Wprowadzono w wersji
-
Zobacz także
Rozwiń bezobsługowo

Opis

Polecenie Rozwiń rozkłada obiekt z blachy.

Użycie

  1. Select a planar face of the sheet metal part.
  2. Activate the Unfold command using one of the following:
    • The Unfold button.
    • The SheetMetal → Unfold menu option.
    • The keyboard shortcut: U.
  3. Adjust unfolding options in the task panel by:

Properties

See also: Property editor.

A SheetMetal Unfold object is derived from a Part Feature object and inherits all its properties. It has no additional properties, but its label has a default value:

Data

Base

  • DANELabel (String): Default value: Unfold (+ a sequential number for second and following items).
    The user editable name of this object, it may be any arbitrary UTF8 string.

Limitations

  • The sheet metal should have a constant thickness.
  • Flat faces should not contain split lines.
  • Flat faces must be truly planar and not B-spline approximations.
  • Faces of bend angles must be truly cylindrical and also not B-spline approximations.
  • The Unfold feature is not parametric. If the model is modified you have to unfold it again.