Robot tutorial/it: Difference between revisions

From FreeCAD Documentation
(Created page with "Tutorial Robot")
 
(Created page with "Questo tutorial serve per spiegare come usare l'ambiente Robot per simulare il set-up di una cella robotizzata.")
Line 1: Line 1:
This tutorial is here to teach you how to use the [[Robot Workbench]] to simulate a robot cell set-up.
Questo tutorial serve per spiegare come usare l'ambiente [[Robot Workbench/it|Robot]] per simulare il set-up di una cella robotizzata.


== before you begin ==
== before you begin ==

Revision as of 21:00, 23 May 2014

Questo tutorial serve per spiegare come usare l'ambiente Robot per simulare il set-up di una cella robotizzata.

before you begin

This tutorial is written for FreeCAD Version 0.11 R3977 or higher. So if you don't have FreeCAD on your computer go to the Download page and do the installation.

This tutorial targeting on the use of industrial robots and not mobile or service robots (see here).