Reverse Engineering Workbench/es: Difference between revisions

From FreeCAD Documentation
(Created page with "Enlace a los hilos apropiados en los que se habla de este ambiente de trabajo")
(Created page with "* 32px Aproximar una superficie B-spline:")
Line 18: Line 18:
The Reverse Engineering (RE) tools are all located in the RE menu and the RE toolbar that appear when you load the RE workbench from the workbench dropdown menu.
The Reverse Engineering (RE) tools are all located in the RE menu and the RE toolbar that appear when you load the RE workbench from the workbench dropdown menu.


* [[Image:FitSurface.svg|32px]] Approximate a B-spline surface:
* [[Image:FitSurface.svg|32px]] Aproximar una superficie B-spline:





Revision as of 21:39, 31 January 2021

El icono del Ambiente de trabajo Ingeniería inversa

Introducción

El Ambiente de trabajo Ingeniería inversa tiene como objetivo proporcionarle herramientas específicas para convertir formas, sólidos y mallas en características paramétricas de FreeCAD. Aún está en desarrollo.

Por el momento no hay ninguna funcionalidad presente en este banco de trabajo. Es usado como una caja de arena por los programadores.

Herramientas

The Reverse Engineering (RE) tools are all located in the RE menu and the RE toolbar that appear when you load the RE workbench from the workbench dropdown menu.

  • Aproximar una superficie B-spline:


Desarrollo

Enlace a los hilos apropiados en los que se habla de este ambiente de trabajo