Reverse Engineering Workbench/es: Difference between revisions

From FreeCAD Documentation
(Created page with "== Desarrollo ==")
(Created page with "== Herramientas ==")
Line 14: Line 14:
Por el momento no hay ninguna funcionalidad presente en este banco de trabajo. Es usado como una caja de arena por los programadores.
Por el momento no hay ninguna funcionalidad presente en este banco de trabajo. Es usado como una caja de arena por los programadores.


== Tools ==
== Herramientas ==


The Reverse Engineering (RE) tools are all located in the RE menu and the RE toolbar that appear when you load the RE workbench from the workbench dropdown menu.
The Reverse Engineering (RE) tools are all located in the RE menu and the RE toolbar that appear when you load the RE workbench from the workbench dropdown menu.

Revision as of 21:37, 31 January 2021

El icono del Ambiente de trabajo Ingeniería inversa

Introducción

El Ambiente de trabajo Ingeniería inversa tiene como objetivo proporcionarle herramientas específicas para convertir formas, sólidos y mallas en características paramétricas de FreeCAD. Aún está en desarrollo.

Por el momento no hay ninguna funcionalidad presente en este banco de trabajo. Es usado como una caja de arena por los programadores.

Herramientas

The Reverse Engineering (RE) tools are all located in the RE menu and the RE toolbar that appear when you load the RE workbench from the workbench dropdown menu.

  • Approximate a B-spline surface:


Desarrollo

Link to appropriate threads discussing this workbench