Raytracing tutorial/fr: Difference between revisions
Renatorivo (talk | contribs) (Created page with "Raytracing tutorial") |
Renatorivo (talk | contribs) (Created page with "{{TutorialInfo/fr |Topic= Raytracing |Level= Beginner |Time= 10 minutes + Render time |Author=[http://freecadweb.org/wiki/index.php?title=User:Drei Drei] |FCVersion=0.16 or ab...") |
||
Line 1: | Line 1: | ||
{{TutorialInfo |
{{TutorialInfo/fr |
||
|Topic= Raytracing |
|Topic= Raytracing |
||
|Level= Beginner |
|Level= Beginner |
Revision as of 21:29, 22 February 2016
Tutoriel |
Thème |
---|
Raytracing |
Niveau |
Beginner |
Temps d'exécution estimé |
10 minutes + Render time |
Auteurs |
Drei |
Version de FreeCAD |
0.16 or above |
Fichiers exemples |
Voir aussi |
None |
Introduction
This tutorial is meant to introduce the reader to the basic workflow of the Raytracing Workbench, as well as most of the tools that are available to create a rendered image.
Requirements
- FreeCAD version 0.16 or above
- POV-Ray and/or LuxRender is installed on the system
- In the case of POV-Ray, installation of psicofil's macro is recommended
- The reader has the basic knowledge to use the Part and PartDesign Workbenches
Procedure
Modeling
In this example a Cube is used as the study object, but models created in the Part or PartDesign Workbenches can be used instead.
- Create a new document
- Activate the Part Workbench
- Create a Cube. You are free to change its properties in any way.
Now we have a model with which to work with.
Preparing for the render
- Switch to the Raytracing Workbench
- Change your View to Perspective. Go to View menu and select Perspective.
- Set the location for the renderer. Go to the Edit menu and select Preferences. Click on Raytracing and set the location to the executable.
- Set the size of the rendered image. Go to the Edit menu and select Preferences. Click on Raytracing and set the desired image size.
POV-Ray
- Select New PovRay project. From the dropdown menu pick RadiosityNormal
LuxRender
- Select New LuxRender project. From the dropdown menu pick LuxClassic
Setting the camera position
- Position the 3D View to the desired location and distance from the model. In this case we will use the Axonometric View.
- Select the Project Folder from the Tree View
- Select Reset camera
Importing the model
- Select the model to render.
- Select Insert part
Running the Renderer
- Select Render.
- Set the path to which the image will be stored.
- Wait for the rendering to finish. This may take a while.
Viewing the results
FreeCAD will immediately open the image after the render is finished.
We are now finished with the basic workflow for the Raytracing Module.