Part Tube/es: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "==Propiedades==")
Line 35: Line 35:
* o usando el [[Property_editor | property editor]] modificando sus propiedades para editar sus parámetros
* o usando el [[Property_editor | property editor]] modificando sus propiedades para editar sus parámetros


==Properties==
==Propiedades==


* Via the [[Property_editor | Property Editor]]:
* Via the [[Property_editor | Property Editor]]:

Revision as of 18:41, 23 May 2021

Part Tube

Menu location
Part → Primitives → Create tube
Workbenches
Part
Default shortcut
None
Introduced in version
0.19
See also
None

Descripción

El comando Tubo inserta un tubo en el documento activo. El tubo es geométricamente tratado como un corte de un cilindro más pequeño dentro de otro mayor. Por defecto, el comando insertará un tubo de 10 mm de altura con un radio exterior de 5 mm y un radio interior de 2 mm. Estos parámetros pueden ser modificados después de que el objeto ha sido introducido.

Screenshot of a Tube

Uso

Se puede crear un tubo de cualquiera de las siguientes maneras:

  • presionando el Tubo botón en la barra de herramientas
  • usando el menú Part → Primitivas → Crear tubo

Para editar el tubo:

  • con cualquiera de las siguientes maneras:
    • seleccionándolo en el árbol y pinchando encima con doble clic
    • editando los parámetros en la caja de diálogo que aparece
  • o usando el property editor modificando sus propiedades para editar sus parámetros

Propiedades

  • Via the Property Editor:
    • Height: Sets the height (default is 10 mm).
    • Inner Radius: Set the inner radius (default is 2 mm).
    • Outer Radius: Set the outer radius (default is 5 mm).
    • Placement: Specifies the orientation and position of the Box in the 3D space. See Placement. The reference point is the left front lower corner of the box.
    • Label: The Label is the name given to the operation. This name can be changed at your convenience.