Part Torus/de: Difference between revisions
(Created page with "== Erstellen == Im Arbeitsbereich Körper (workbench Part) auf das Symbol 32px klicken. Zunächst entsteht ein vollständiger Torus mit mit mittlerem...") |
No edit summary |
||
Line 2: | Line 2: | ||
== Zusammenfassung == |
== Zusammenfassung == |
||
Erstellt wird ein parametrisierter Torus: Parameter sind der |
Erstellt wird ein parametrisierter Torus: Parameter sind der mittlere Ring- Radius dieses "Schwimmringes" und der Radius seines Querschnitts. |
||
[[File:SimpleTorus.jpg|400px]] |
[[File:SimpleTorus.jpg|400px]] |
Revision as of 15:29, 15 January 2018
Part Torus |
Menüeintrag |
---|
Part → Torus |
Arbeitsbereich |
Part, Complete |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Part CreatePrimitives |
Zusammenfassung
Erstellt wird ein parametrisierter Torus: Parameter sind der mittlere Ring- Radius dieses "Schwimmringes" und der Radius seines Querschnitts.
How to use
Erstellen
Im Arbeitsbereich Körper (workbench Part) auf das Symbol klicken. Zunächst entsteht ein vollständiger Torus mit mit mittlerem Ring-Radius 10 mm, und Querschnitt-Radius 2mm.
Option
Parameter
A torus can be assimilated to a small disc that makes a circular orbit around an imaginary axe. Thus the parametric torus is defined by the following parameters:
- Radius1: Radius of the circle around which the disc circulate
- Radius2: Radius of the disc defining the form of the torus
- Angle1: 1st angle to cut / define the disc of the torus
- Angle2: 2nd angle to cut / define the disc of the torus
- Angle3: 3rd angle to define the circumference of the torus.
as well as the standard set of placement parameters. The pictures below give a visual overview of the parameters antecedently mentioned:
The parameter Radius1 has a value of 20 mm.
The parameter Radius2 has a value of 2 mm.
The parameter Angle1 has a value of -90°. Notice that, the "angle measure" tool cannot display negative angle. Considered the displayed value in picture as "-90°".
The parameter Angle2 has a value of 90°.
The parameter Angle3 has a value of 90°.