Part CrossSections/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
No edit summary
Line 1: Line 1:
{{GuiCommand/it|Name=Part SectionCross|Name/it=Sezioni...|MenuLocation=Parte → Sezioni...|Workbenches=[[Part Module/it|Parte]]|SeeAlso=[[Part_Section/it|Seziona]]}}
<div class="mw-translate-fuzzy">
{{GuiCommand/it|Name=Part SectionCross|Name/it=Sezioni...|MenuLocation=Parte → Sezioni...|Workbenches=[[Part Module/it | Parte]], Completo|SeeAlso=[[Part_Section/it|Seziona]]}}
</div>


==Description==
==Description==

Revision as of 20:38, 23 April 2018

Sezioni...

Posizione nel menu
Parte → Sezioni...
Ambiente
Parte
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Seziona

Description

The Cross-sections utility creates one or more cross-sections through the selected shape.

How to use

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Example

Fornisce una o più sezioni di un oggetto secondo uno o più piani modificabili.

Utilizzo

Selezionare l'ambiente Template:KEY/it, nella barra degli strumenti, oppure in Visualizza → Ambiente → Parte.

Per eseguire una operazione di Sezione con un piano su un oggetto, selezionare l'oggetto da sezionare poi cliccare sul pulsante Template:KEY/it.

Opzioni

........

Esempio

Selezionare un oggetto e avviare la funzione.

Selezionare un oggetto

Si apre la finestra di dialogo per impostare la sezione.

Finestra di dialogo

Nascondere l'oggetto sezionato per visualizzare il risultato e, eventualmente riposizionare la sezione.

Risultato

Per creare delle sezioni tra due oggetti vedere la pagina Seziona