Parça Tasarım Tezgahı - Eskiz Oluştur

From FreeCAD Documentation
Revision as of 10:52, 2 January 2019 by Skywalker21 (talk | contribs) (Created page with "== Seçenekler ==")

Eskiz Oluştur

Menü konumu
Parça tasarım → Eskiz Oluştur
Tezgahlar
Parça tasarım tezgahı
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
0.17
Ayrıca bkz
Hiçbiri

Tanım

Bu araç yeni bir eskiz oluşturur, mevcut değilse taslak içeren yeni bir Cisim oluşturur ve oluşturulduktan sonra Eskiz tezgahını otomatik olarak açar.

Parça tasarım tezgahını kullanarak modeller oluştururken , bu araç Eskiz tezgahında bulunan Eskiz Oluştur aracına tercih edilmelidir .

Nasıl kullanılır

  1. Parça tasarım araç çubuğunda tuşuna basınız.
  2. Görevler panelinde, Özellik seç diyalogu açılır. Listede veya daha iyi görünürlük için yeniden yönlendirilebilecek 3D görünümündeki düzlemlerden birini seçin.
  3. Tamam tuşuna basın.
  4. Arayüz otomatik olarak Eskiz tezgahına geçer ve eskiz düzenlenebilir. Eskizden çıktıktan sonra, arayüz Parça tasarım tezgahına geri getirilir ve eskizden önce 3D görünüm durumuna geri yüklenir.
  5. Alternatif olarak, eskiz oluşturulmadan önce mevcut aktif yapı üzerindeki bir düzlem veya yüz seçilebilir, bu durumda eskiz anında oluşturulur.

Seçenekler

  • To change the attachment of an existing sketch, change its Map Mode property (see Properties.)

Properties

  • VeriMap Mode: mode of attachment of the sketch to another object, usually a plane or a face but can be other types of objects. Click once in the field to reveal a ... button and press it to open the Attachment dialog. If set to Deactivated, the Placement property is enabled.
  • VeriPlacement: controls the orientation of the sketch in the 3D space; see placement. Disabled if the sketch is attached through the Map Mode property.