PartDesign MuoverePunta

From FreeCAD Documentation
Revision as of 18:26, 26 February 2018 by Renatorivo (talk | contribs) (Created page with "{{Version/it|0.17}}")

Usa come entità finale

Posizione nel menu
Menu contestuale → Usa come entità finale
Ambiente
PartDesign
Avvio veloce
None
Introdotto nella versione
-
Vedere anche
Sposta in altro corpo, Sposta dopo altro oggetto

Descrizione

Set tip as this command is labeled in the contextual menu redefines the tip, which is the feature exposed outside of the Body. By default, the tip is the last feature added to the Body; but sometimes it can be useful to temporarily set the tip to a feature earlier in the tree. This may be done to add a sketch, datum geometry or a feature which in retrospect should have been created earlier in the Body's history.

The tip is visually distinguished in the Model tree by a small white down arrow in a green circle overlayed on the feature's icon.

disponibile dalla versione 0.17

How to use

  1. In the Model tree, right-click on the feature to set as tip.
  2. Select Set tip.
  3. The new tip is set to visible, and all elements below the tip are hidden from view. Elements newly created from that point will be placed under the tip, and above the other existing elements.

Note: it is important not to forget to set the tip again to the last feature at the bottom of the Body tree.