PartDesign: Linea di riferimento

From FreeCAD Documentation
Revision as of 20:23, 25 February 2018 by Renatorivo (talk | contribs) (Created page with "Crea una '''linea di riferimento''' che può essere utilizzata come riferimento per schizzi, altre geometrie di riferimento o caratteristiche. Ad esempio può essere utilizzat...")

Linea di riferimento

Posizione nel menu
Part Design → Linea di riferimento
Ambiente
PartDesign
Avvio veloce
None
Introdotto nella versione
-
Vedere anche
Punto di riferimento, Piano di riferimento

Descrizione

Crea una linea di riferimento che può essere utilizzata come riferimento per schizzi, altre geometrie di riferimento o caratteristiche. Ad esempio può essere utilizzata come asse di rivoluzione per le funzioni Rivoluzione e Scanalatura.

introduced in version 0.17

How to use

  1. Press the Create a datum line button.
  2. Define Line parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Options

Double-click the DatumLine label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.

Properties

  • DatiMapMode: lists the attachment mode used.
  • DatiAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • DatiLabel: name given to the object, this name can be changed at convenience.