PartDesign: Sistema di coordinate

From FreeCAD Documentation
Revision as of 20:49, 1 February 2019 by Renatorivo (talk | contribs) (Created page with "=== Dati ===")

Sistema di coordinate locale

Posizione nel menu
PartDesign → Sistema di coordinate locale
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
0.18
Vedere anche
Punto di riferimento, Linea di riferimento, Piano di riferimento

Descrizione

Crea un sistema di coordinate locali che può essere usato come riferimento per altre geometrie di riferimento. Aiuta anche a identificare l'orientamento della geometria di riferimento referenziata nello spazio 3D.

Sistema di coordinate locale originato dall'origine di un piano di riferimento.

Utilizzo

  1. Press the Create a local coordinate system button.
  2. Define Coordinate System parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Opzioni

Fare doppio clic sull'etichetta Local_CS nell'albero del modello o fare clic con il tasto destro e selezionare Modifica il riferimento nel menu contestuale per modificarne i parametri. Per ulteriori dettagli sulla modalità e l'offset di associazione, vedere Associazione.

Proprietà

Dati

  • DatiMapMode: lists the attachment mode used.
  • DatiAttachment Reversed: indicates if the coordinate system is reversed in orientation.
  • DatiAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • DatiPlacement: indicates the coordinates and alignment of the coordinates system´s origin .
  • DatiLabel: name given to the object, this name can be changed at convenience.