PartDesign CoordinateSystem/it: Difference between revisions

From FreeCAD Documentation
(Created page with "Crea un '''sistema di coordinate locali''' che può essere usato come riferimento per altre geometrie di riferimento. Aiuta anche a identificare l'orientamento della geometria...")
(Created page with "{{Caption|Sistema di coordinate locale originato dall'origine di un piano di riferimento.}}")
Line 13: Line 13:
Crea un '''sistema di coordinate locali''' che può essere usato come riferimento per altre geometrie di riferimento. Aiuta anche a identificare l'orientamento della geometria di riferimento referenziata nello spazio 3D.
Crea un '''sistema di coordinate locali''' che può essere usato come riferimento per altre geometrie di riferimento. Aiuta anche a identificare l'orientamento della geometria di riferimento referenziata nello spazio 3D.
[[File:PartDesign_LocalCoordinateSystem_Example.png|none]]
[[File:PartDesign_LocalCoordinateSystem_Example.png|none]]
{{Caption|Local coordinate system originating out of a datum plane's origin.}}
{{Caption|Sistema di coordinate locale originato dall'origine di un piano di riferimento.}}


==How to use==
==How to use==

Revision as of 20:44, 1 February 2019

Sistema di coordinate locale

Posizione nel menu
PartDesign → Sistema di coordinate locale
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
0.18
Vedere anche
Punto di riferimento, Linea di riferimento, Piano di riferimento

Descrizione

Crea un sistema di coordinate locali che può essere usato come riferimento per altre geometrie di riferimento. Aiuta anche a identificare l'orientamento della geometria di riferimento referenziata nello spazio 3D.

Sistema di coordinate locale originato dall'origine di un piano di riferimento.

How to use

  1. Press the Create a local coordinate system button.
  2. Define Coordinate System parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Options

Double-click the Local_CS label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.

Properties

Data

  • DatiMapMode: lists the attachment mode used.
  • DatiAttachment Reversed: indicates if the coordinate system is reversed in orientation.
  • DatiAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • DatiPlacement: indicates the coordinates and alignment of the coordinates system´s origin .
  • DatiLabel: name given to the object, this name can be changed at convenience.