PartDesign Clone

From FreeCAD Documentation
Revision as of 20:09, 25 February 2018 by Renatorivo (talk | contribs) (Created page with "== Utilizzo ==")

PartDesign Clone

Posizione nel menu
PartDesign → Crea un clone
Ambiente
PartDesign
Avvio veloce
None
Introdotto nella versione
-
Vedere anche
Draft clone

Descrizione

PartDesign Clone creates a linked copy of a selected object. Most types of objects are accepted. The main use for the PartDesign Clone is to use an object created in another workbench for a PartDesign Boolean feature. It can also be simply used to create linked copies.

disponibile dalla versione 0.17

Utilizzo

  1. In the Model tree, select the object to be cloned.
  2. Press the Create a clone button.

Properties

  • DatiBase Feature: sets the original object the clone is based on. To replace, press the ... button to get a list of available objects.
  • DatiPlacement: defines the orientation and position of the Clone in the 3D space. See Placement.
  • DatiLabel: label given to the Clone object. Change to suit your needs.

Limitations

  • Only a single object can be used for a PartDesign Clone.