PartDesign Booleane

From FreeCAD Documentation
Revision as of 22:06, 12 February 2018 by Renatorivo (talk | contribs) (Created page with "== Opzioni ==")

Operazioni booleane

Posizione nel menu
Part Design → Operazioni booleane
Ambiente
PartDesign
Avvio veloce
None
Introdotto nella versione
-
Vedere anche
None

Descrizione

PartDesign Booleane importa uno o più Corpi PartDesign o Cloni PartDesign (designati come "tool bodies") nel corpo PartDesign attivo e applica un'operazione booleana (fusione, taglio o comune).

disponibile dalla versione 0.17

A sinistra il corpo attivo (A) con i corpi utensile (B) e (C); a destra il risultato dopo un taglio booleano.

Utilizzo

  1. Attivare il corpo che deve ricevere l'operazione booleana.
  2. Premere il pulsante Booleana.
  3. In Parametri Booleana, cliccare sul pulsante Aggiungi corpo. Il corpo attivo scompare temporaneamente dalla vista 3D per facilitare la selezione del corpo utensile.
  4. Nella vista 3D, selezionare il corpo da usare nella funzione booleana. Ripetere per aggiungere altri corpi.
  5. Selezionare il tipo di operazione booleana nel menu a discesa (Fuse, Cut o Common)
  6. Cliccare su OK.

In alternativa, è possibile selezionare uno o più Corpi prima di premere il pulsante Booleana; essi vengono aggiunti automaticamente.

Opzioni

  • Fuse: merges the tool body or bodies to the active body.
  • Cut: subtracts the tool body or bodies from the active body.
  • Common: extracts the intersection from the selected body or bodies with the active body
  • Press the Remove body button to remove a body, by selecting it in the 3D view.

Properties

  • DatiType: sets the Boolean operation (Fuse, Cut, Common)
  • DatiLabel: name given to the operation, this name can be changed at convenience.
  • DatiGroup: lists the tool bodies.
  • VistaDisplay: sets the display between 2 modes:
    • Result (default): displays the result of the Boolean feature. In this mode, the tool Bodies cannot be displayed in their original state, even when their visibility is toggled on.
    • Tools: displays the tool Bodies in their original state. This mode is useful when editing tool Bodies is needed.
  • VistaSelectable: true or false. If set to false, the feature cannot be selected in the 3D view.
  • VistaVisibility: true or false. Toggles the feature's visibility in the 3D view.

Limitations

  • For Common to work with more than one tool body, they must all intersect each other along with the active Body.
  • Tool bodies adopt the local origin of the active Body. If the active Body is not located at (0,0,0) in the global coordinate system, the tool bodies' placement need to be relative to the active Body. It may be easier to leave the active Body's placement at the origin before applying the Boolean feature, then to change its placement.