PartDesign: Additive Pipe
PartDesign AdditivePipe |
poziția meniului |
---|
PartDesign → Additive pipe |
Ateliere |
PartDesign |
scurtătură |
nici unul |
Prezentat în versiune |
0.17 |
A se vedea, de asemenea, |
PartDesign Additive Loft |
Descriere
Additive Pipe creează un solid în corpul activ, prin baleierea uneia sau a mai multor schițe (denumite și secțiuni transversale) de-a lungul unei căi deschise sau închise. Dacă corpul conține deja funcții(onalități), conductele aditive vor fi îmbinate cu ele.
On the left: cross-sections (A) and (B) to be swept along path (C); resulting Additive pipe on the right.
Cum se folosește
- Press the Additive pipe button.
- In the Select feature dialog, select a sketch to be used as first cross-section and click OK.
- Alternatively, a single sketch can be selected prior to pressing the Additive pipe button.
- In the Pipe parameters under Profile, press the Object button.
- Select the sketch to be used as path in the 3D view:
- Alternatively, edges of the body can be selected by pressing Add Edge and selecting edges in the 3D view.
- To use more than one cross-section, under Section transformation set the Transform mode to Multisection; press Add Section then select a sketch in the 3D view. Repeat for each additional cross-section.
- Set options if needed and click OK.
Opţiuni
Proprietăți
- DateLabel: nume dat operațiunii, acest nume poate fi schimbat dacă este necesar.
- DateRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.
- DateSections: lists the sections used.
- DateSpine Tangent: true or false (default). True extends the path to include tangent edges.
- DateAuxiliary Spine Tangent: true or false (default). True extends the auxiliary path to include tangent edges.
- DateAuxiliary Curvelinear: true or false (default). True calculates normal between equidistant points on both spines.
- DateMode: profile mode. See Options.
- DateBinormal: binormal vector for corresponding orientation mode.
- DateTransition: transition mode. Options are Transformed, Right Corner or Round Corner.
- DateTransformation: "Constant" folosește o singură secțiune transversală. "Multisecția" utilizează două sau mai multe secțiuni transversale. Linear , S-shape și Interpolation nu sunt în prezent funcționale.
Limite
- Schițele utilizate pentru secțiunile transversale trebuie să formeze profile închise.
- Nu este posibil să se utilizeze un vertex ca secțiune transversală.
- O secțiune transversală nu poate fi așezată pe același plan ca cea precedentă.
- Pentru a controla mai bine forma conductei/țevii, se recomandă ca toate secțiunile transversale să aibă același număr de segmente. De exemplu, pentru o țeavă între un dreptunghi și un cerc, cercul poate fi împărțit în 4 arce conectate.