PartDesign Loft additivo
Loft additivo |
Posizione nel menu |
---|
Part Design → Loft additivo |
Ambiente |
PartDesign |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Bugna additiva |
Descrizione
Loft additivo crea un solido nel corpo attivo eseguendo una transizione tra due o più schizzi (indicati anche come sezioni trasversali). Se il corpo contiene già delle funzionalità, il loft additivo viene unito a loro.
disponibile dalla versione 0.17
On the left: cross-sections (A), (B) and (C); created Additive loft on the right.
Utilizzo
- Press the Additive loft button.
- In the Select feature dialog, select a sketch to be used as first cross-section and click OK.
- Alternatively, a single sketch can be selected prior to pressing the Additive loft button.
- In the Loft parameters, press the Add Section button.
- Select a sketch in the 3D view. Repeat to select more sketches.
- Set options if needed and click OK.
Opzioni
- Ruled surface: makes straight transitions between cross-sections. Dos not apply to a loft with two cross-sections. If not checked, transitions will be smooth.
- Closed: makes a transition from the last cross-section to the first, creating a loop.
- Press the Remove Section button to remove a sketch, by selecting it in the 3D view.
Proprietà
- DatiLabel: name given to the operation, this name can be changed at convenience.
- DatiSections: lists the sections used.
- DatiRuled: see Options.
- DatiClosed: see Options.
- DatiMidplane:
- DatiReversed:
- DatiRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.
Limitazioni
- Sketches must form closed profiles.
- It is not possible to loft to a vertex.
- A cross-section cannot lie on the same plane as the one immediately preceding it.
- To better control the shape of the loft, it is recommended that all the cross-sections have the same number of segments. For example, for a loft between a rectangle and a circle, the circle may be broken down into 4 connected arcs.
Links
- Part Loft Technical Details explains how a Part Loft is created, much of its content is relevant to the PartDesign Additive loft.