PartDesign AdditiveBox/it: Difference between revisions
Renatorivo (talk | contribs) (Created page with "== Opzioni ==") |
Renatorivo (talk | contribs) (Created page with "== Proprietà ==") |
||
Line 21: | Line 21: | ||
* Via the [[Property editor]]. |
* Via the [[Property editor]]. |
||
== |
== Proprietà == |
||
* {{PropertyData|Attachment}}: defines the attachment mode as well as the Attachment Offset. See [[Part Attachment]]. |
* {{PropertyData|Attachment}}: defines the attachment mode as well as the Attachment Offset. See [[Part Attachment]]. |
Revision as of 21:44, 7 February 2018
Cubo additivo |
Posizione nel menu |
---|
Part Design → Crea una primitiva additiva → Cubo |
Ambiente |
PartDesign |
Avvio veloce |
None |
Introdotto nella versione |
- |
Vedere anche |
Primitive additive |
Descrizione
Inserisce un cubo primitivo nel corpo attivo come prima caratteristica o lo fonde con le caratteristiche esistenti.
disponibile dalla versione 0.17
Utilizzo
- Press the Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- A Box feature appears under the active Body.
Opzioni
The Box can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Proprietà
- DatiAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
- DatiLabel: Label given to the Box object. Change to suit your needs.
- DatiLength: the Box's dimension in the X-direction.
- DatiWidth: the Box's dimension in the Y-direction.
- DatiHeight: the Box's dimension in the Z-direction.