PartDesign AdditiveBox/it: Difference between revisions

From FreeCAD Documentation
(Created page with "== Utilizzo ==")
(Created page with "== Opzioni ==")
Line 15: Line 15:
# A Box feature appears under the active Body.
# A Box feature appears under the active Body.


==Options==
== Opzioni ==


The Box can be edited after its creation in two ways:
The Box can be edited after its creation in two ways:

Revision as of 21:44, 7 February 2018

Cubo additivo

Posizione nel menu
Part Design → Crea una primitiva additiva → Cubo
Ambiente
PartDesign
Avvio veloce
None
Introdotto nella versione
-
Vedere anche
Primitive additive

Descrizione

Inserisce un cubo primitivo nel corpo attivo come prima caratteristica o lo fonde con le caratteristiche esistenti.

disponibile dalla versione 0.17

Utilizzo

  1. Press the Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.

Opzioni

The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DatiAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DatiLabel: Label given to the Box object. Change to suit your needs.
  • DatiLength: the Box's dimension in the X-direction.
  • DatiWidth: the Box's dimension in the Y-direction.
  • DatiHeight: the Box's dimension in the Z-direction.