PartDesign AdditiveBox/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Version/it|0.17}}")
(Created page with "== Utilizzo ==")
Line 8: Line 8:


[[File:PartDesign_AdditiveBox_example.png|200px]]
[[File:PartDesign_AdditiveBox_example.png|200px]]
==How to use==
== Utilizzo ==


# Press the {{KEY|[[Image:PartDesign AdditiveBox.png|24px]] '''Additive Box'''}} button. '''Note''': the Additive Box is part of an icon menu labelled ''Create an additive primitive''. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
# Press the {{KEY|[[Image:PartDesign AdditiveBox.png|24px]] '''Additive Box'''}} button. '''Note''': the Additive Box is part of an icon menu labelled ''Create an additive primitive''. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.

Revision as of 21:44, 7 February 2018

Cubo additivo

Posizione nel menu
Part Design → Crea una primitiva additiva → Cubo
Ambiente
PartDesign
Avvio veloce
None
Introdotto nella versione
-
Vedere anche
Primitive additive

Descrizione

Inserisce un cubo primitivo nel corpo attivo come prima caratteristica o lo fonde con le caratteristiche esistenti.

disponibile dalla versione 0.17

Utilizzo

  1. Press the Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.

Options

The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DatiAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DatiLabel: Label given to the Box object. Change to suit your needs.
  • DatiLength: the Box's dimension in the X-direction.
  • DatiWidth: the Box's dimension in the Y-direction.
  • DatiHeight: the Box's dimension in the Z-direction.