Manuale:Navigare nella vista 3D

From FreeCAD Documentation
Revision as of 21:03, 26 July 2016 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Alcune parole sullo spazio 3D

Se questo è il primo contatto con un'applicazione 3D, prima è necessario afferrare alcuni concetti. In caso contrario, si può tranquillamente saltare questa sezione.

Lo spazio 3D in FreeCAD è uno spazio euclideo. Ha un punto di origine e tre assi: X, Y e Z. Se si guarda la scena dall'alto, convenzionalmente, i punti l'asse X punta verso destra, l'asse Y all'indietro, e l'asse Z verso l'alto. Nell'angolo in basso a destra della vista di FreeCAD, è sempre possibile vedere da dove si sta visualizzando la scena:

Ogni punto di ogni oggetto che esiste in quello spazio può essere localizzato dalle sue coordinate (x, y, z). Ad esempio, un punto di coordinate (2,3,1) giace a 2 unità sull'asse X, 3 unità sull'asse Y, e 1 unità sull'asse Z:

Si può guardare la scena da qualsiasi angolazione, come se si fosse in possesso di una fotocamera. Questa camera può essere spostata a sinistra, a destra, su e giù (Sposta), ruotata attorno a ciò che si sta guardando (Ruota) e portata più vicino o più lontano dalla scena (Zoom).

La vista 3D di FreeCAD

Navigating in the FreeCAD 3D view can be done with a mouse, a Space Navigator device, the keyboard, a touchpad, or a combination of those. FreeCAD proposes several navigation modes, which determine how the three basic view manipulation operations (pan, rotate and zoom) are done, as well as how to select objects on the screen are performed. Navigation modes are accessed from the Preferences screen, or directly by right-clicking anywhere on the 3D view:

Each of these modes attributes different mouse buttons, or mouse + keyboard combinations, or mouse gestures, to these four operations. The following table shows the principal available modes:

Mode Pan Rotate Zoom Select
Inventor CTRL +
CAD (default)
Blender SHIFT +
Touchpad SHIFT + ALT + PGUP / PGDOWN
Gesture + DRAG + DRAG

Alternatively, some keyboard controls are always available, no matter the navigation mode:

  • CTRL + and CTRL - to zoom in and zoom out
  • The arrow keys to shift the view left/right and up/down
  • SHIFT + left arrow and SHIFT + right arrow to rotate the view by 90 degrees
  • the numeric keys, 1 to 6, for the six standard views, top, front, right, bottom, back and left
  • O will set the camara in orthographic mode,
  • while P sets it in perspective mode.
  • CTRL will allow you to select more than one object or element

These controls are also available from the View menu and some from the View toolbar.

Selecting objects

Objects in the 3D view can be selected by clicking them with the corresponding mouse button, depending on the navigation mode. A single click will select the object, and one of its subcomponents (edge, face, vertex). Double-clicking will select the object, and all its subcomponents. You can select more than one subcomponent, or even different subcomponents from different objects, by pressing the CTRL key. Clicking with the selection button on an empty portion of the 3D view will deselect everything.

A panel called "Selection view", available from the View menu, can also be turned on, which shows you what is currently selected:

You can also use the Selection View to select objects by searching for a particular object.

Read more