Fasteners Workbench/es: Difference between revisions
(Updating to match new version of source page) |
(Updating to match new version of source page) |
||
Line 90: | Line 90: | ||
Los elementos de sujeción con dimensiones métricas tienen íconos naranjas. Los elementos de sujeción con dimensiones en pulgadas tienen íconos verdes. |
Los elementos de sujeción con dimensiones métricas tienen íconos naranjas. Los elementos de sujeción con dimensiones en pulgadas tienen íconos verdes. |
||
=== |
=== Hexagon head screws and bolts === |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.2.1.6.svg|32px]] '''ASME B18.2.1.6''' UNC hexagon head screw. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.2.1.8.svg|32px]] '''ASME B18.2.1.8''' UNC hexagon head screw with flange. |
||
* [[Image: |
* [[Image:Fasteners_DIN571.svg|32px]] '''DIN 571''' Hexagon head wood screw. |
||
* [[Image:Fasteners_PCBStandoff.svg|32px]] PCB standoff female/male. |
|||
* [[Image:Fasteners_PCBSpacer.svg|32px]] PCB spacer female/female. |
|||
* [[Image:Fasteners_IUTHeatInsert.svg|32px]] Heat staked insert. |
|||
=== Hexagon head screws and bolts === |
|||
* [[Image:Fasteners_DIN933.svg|32px]] '''DIN 933''' Hexagon head screw. |
* [[Image:Fasteners_DIN933.svg|32px]] '''DIN 933''' Hexagon head screw. |
||
* [[Image:Fasteners_DIN961.svg|32px]] '''DIN 961''' Hexagon head screw. |
* [[Image:Fasteners_DIN961.svg|32px]] '''DIN 961''' Hexagon head screw. |
||
* [[Image:Fasteners_ISO4017.svg|32px]] '''ISO 4017''' Hexagon head screw. ''Product grades A and B.'' |
|||
* [[Image:Fasteners_ISO8676.svg|32px]] '''ISO 8676''' Hexagon head screw with fine pitch thread. ''Product grades A and B.'' |
|||
* [[Image:Fasteners_ISO4014.svg|32px]] '''ISO 4014''' Hexagon head bolt. ''Product grades A and B.'' |
|||
* [[Image:Fasteners_EN1662.svg|32px]] '''EN 1662''' Hexagon head bolt with flange, small series. |
* [[Image:Fasteners_EN1662.svg|32px]] '''EN 1662''' Hexagon head bolt with flange, small series. |
||
Line 120: | Line 106: | ||
* [[Image:Fasteners_EN1665.svg|32px]] '''EN 1665''' Hexagon head bolt with flange, heavy series. |
* [[Image:Fasteners_EN1665.svg|32px]] '''EN 1665''' Hexagon head bolt with flange, heavy series. |
||
* [[Image: |
* [[Image:Fasteners_ISO4014.svg|32px]] '''ISO 4014''' Hexagon head bolt. ''Product grades A and B.'' |
||
* [[Image: |
* [[Image:Fasteners_ISO4017.svg|32px]] '''ISO 4017''' Hexagon head screw. ''Product grades A and B.'' |
||
* [[Image: |
* [[Image:Fasteners_ISO8676.svg|32px]] '''ISO 8676''' Hexagon head screw with fine pitch thread. ''Product grades A and B.'' |
||
=== Hexagon socket screws === |
=== Hexagon socket screws === |
||
* [[Image:Fasteners_ISO4762.svg|32px]] '''ISO 4762''' Hexagon socket head cap screw. |
|||
* [[Image:Fasteners_DIN7984.svg|32px]] '''DIN 7984''' Hexagon socket head cap screw with low head. |
|||
* [[Image:Fasteners_DIN6912.svg|32px]] '''DIN 6912''' Hexagon socket head cap screw with low head with center. |
|||
* [[Image:Fasteners_ISO7380-1.svg|32px]] '''ISO 7380-1''' Hexagon socket button head screw. |
|||
* [[Image:Fasteners_ISO7380-2.svg|32px]] '''ISO 7380-2''' Hexagon socket button head screw with flange. |
|||
* [[Image:Fasteners_ISO10642.svg|32px]] '''ISO 10642''' Hexagon socket countersunk head screw. |
|||
* [[Image:Fasteners_ISO7379.svg|32px]] '''ISO 7379''' Hexagon socket head shoulder screw. |
|||
* [[Image:Fasteners_ISO4026.svg|32px]] '''ISO 4026''' Hexagon socket set screw with flat point. |
|||
* [[Image:Fasteners_ISO4027.svg|32px]] '''ISO 4027''' Hexagon socket set screw with cone point. |
|||
* [[Image:Fasteners_ISO4028.svg|32px]] '''ISO 4028''' Hexagon socket set screw with dog point. |
|||
* [[Image:Fasteners_ISO4029.svg|32px]] '''ISO 4029''' Hexagon socket set screw with cup point. |
|||
* [[Image:Fasteners_ASMEB18.3.1A.svg|32px]] '''ASME B18.3.1A''' UNC hexagon socket head cap screw. |
* [[Image:Fasteners_ASMEB18.3.1A.svg|32px]] '''ASME B18.3.1A''' UNC hexagon socket head cap screw. |
||
Line 162: | Line 126: | ||
* [[Image:Fasteners_ASMEB18.3.4.svg|32px]] '''ASME B18.3.4''' UNC hexagon socket head shoulder screw. |
* [[Image:Fasteners_ASMEB18.3.4.svg|32px]] '''ASME B18.3.4''' UNC hexagon socket head shoulder screw. |
||
* [[Image: |
* [[Image:Fasteners_DIN6912.svg|32px]] '''DIN 6912''' Hexagon socket head cap screw with low head with center. |
||
* [[Image: |
* [[Image:Fasteners_DIN7984.svg|32px]] '''DIN 7984''' Hexagon socket head cap screw with low head. |
||
* [[Image: |
* [[Image:Fasteners_ISO2936.svg|32px]] '''ISO 2936''' Hexagon socket screw key. |
||
* [[Image: |
* [[Image:Fasteners_ISO4762.svg|32px]] '''ISO 4762''' Hexagon socket head cap screw. |
||
* [[Image:Fasteners_ISO7379.svg|32px]] '''ISO 7379''' Hexagon socket head shoulder screw. |
|||
* [[Image:Fasteners_ISO7380-1.svg|32px]] '''ISO 7380-1''' Hexagon socket button head screw. |
|||
* [[Image:Fasteners_ISO7380-2.svg|32px]] '''ISO 7380-2''' Hexagon socket button head screw with flange. |
|||
* [[Image:Fasteners_ISO10642.svg|32px]] '''ISO 10642''' Hexagon socket countersunk head screw. |
|||
=== Hexalobular socket head screws === |
=== Hexalobular socket head screws === |
||
Line 184: | Line 156: | ||
=== Slotted head screws === |
=== Slotted head screws === |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.1.2.svg|32px]] '''ASME B18.6.1.2''' Slotted flat countersunk head wood screw. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.1.4.svg|32px]] '''ASME B18.6.1.4''' Slotted oval countersunk head wood screw. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.3.1A.svg|32px]] '''ASME B18.6.3.1A''' UNC slotted countersunk flat head screw. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.3.4A.svg|32px]] '''ASME B18.6.3.4A''' UNC slotted oval countersunk head screw. |
||
* [[Image:Fasteners_ASMEB18.6.3.9A.svg|32px]] '''ASME B18.6.3.9A''' UNC slotted pan head screw. |
|||
* [[Image:Fasteners_ASMEB18.6.3.10A.svg|32px]] '''ASME B18.6.3.10A''' UNC Slotted fillister head screw. |
|||
* [[Image:Fasteners_ASMEB18.6.3.12A.svg|32px]] '''ASME B18.6.3.12A''' UNC Slotted truss head screws. |
|||
* [[Image:Fasteners_ASMEB18.6.3.16A.svg|32px]] '''ASME B18.6.3.16A''' UNC Slotted round head screw. |
|||
* [[Image:Fasteners_DIN84.svg|32px]] '''DIN 84 (superseded by ISO 1207)''' Slotted cheese head screw. ''Product grade A.'' |
* [[Image:Fasteners_DIN84.svg|32px]] '''DIN 84 (superseded by ISO 1207)''' Slotted cheese head screw. ''Product grade A.'' |
||
Line 200: | Line 180: | ||
* [[Image:Fasteners_GOST1144-2.svg|32px]] '''GOST 1144-2''' Slotted half round head wood screw. |
* [[Image:Fasteners_GOST1144-2.svg|32px]] '''GOST 1144-2''' Slotted half round head wood screw. |
||
* [[Image: |
* [[Image:Fasteners_ISO1207.svg|32px]] '''ISO 1207''' Slotted cheese head screw. ''Product grade A.'' |
||
* [[Image:Fasteners_ISO1580.svg|32px]] '''ISO 1580''' Slotted pan head screw. ''Product grade A.'' |
|||
* [[Image:Fasteners_ISO2009.svg|32px]] '''ISO 2009''' Slotted countersunk flat head screw. ''Product grade A.'' |
|||
* [[Image:Fasteners_ISO2010.svg|32px]] '''ISO 2010''' Slotted raised countersunk head screw. ''Product grade A.'' |
|||
=== H cross head screws === |
=== H cross head screws === |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.1.3.svg|32px]] '''ASME B18.6.1.3''' Flat countersunk head wood screw. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.1.5.svg|32px]] '''ASME B18.6.1.5''' Oval countersunk head wood screw. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.3.1B.svg|32px]] '''ASME B18.6.3.1B''' UNC flat countersunk head screw. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.3.4B.svg|32px]] '''ASME B18.6.3.4B''' UNC oval countersunk head screw. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.3.9B.svg|32px]] '''ASME B18.6.3.9B''' UNC pan head screw. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.3.10B.svg|32px]] '''ASME B18.6.3.10B''' UNC fillister head screw. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.3.12C.svg|32px]] '''ASME B18.6.3.12C''' UNC truss head screws. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.6.3.16B.svg|32px]] '''ASME B18.6.3.16B''' UNC round head screw. |
||
* [[Image:Fasteners_DIN967.svg|32px]] '''DIN 967''' Pan head screw with collar. |
|||
=== Other head bolts === |
|||
* [[Image: |
* [[Image:Fasteners_DIN7996.svg|32px]] '''DIN 7996''' Pan head wood screw. |
||
* [[Image: |
* [[Image:Fasteners_GOST1144-3.svg|32px]] '''GOST 1144-3''' Pan head wood screw. |
||
* [[Image: |
* [[Image:Fasteners_GOST1144-4.svg|32px]] '''GOST 1144-4''' Pan head wood screw. |
||
* [[Image: |
* [[Image:Fasteners_ISO7045.svg|32px]] '''ISO 7045''' Pan head screw. ''Product grade A.'' |
||
* [[Image:Fasteners_ISO7046.svg|32px]] '''ISO 7046''' Countersunk flat head screw. ''Product grade A.'' |
|||
=== Nuts === |
|||
* [[Image: |
* [[Image:Fasteners_ISO7047.svg|32px]] '''ISO 7047''' Raised countersunk head screw. ''Product grade A.'' |
||
* [[Image: |
* [[Image:Fasteners_ISO7048.svg|32px]] '''ISO 7048''' Cheese head screw. |
||
* [[Image: |
* [[Image:Fasteners_ISO7049-C.svg|32px]] '''ISO 7049-C''' Pan head self tapping screws with conical point. |
||
* [[Image: |
* [[Image:Fasteners_ISO7049-F.svg|32px]] '''ISO 7049-F''' Pan head self tapping screws with flat point. |
||
* [[Image: |
* [[Image:Fasteners_ISO7049-R.svg|32px]] '''ISO 7049-R''' Pan head self tapping screws with rounded point. |
||
=== Other head bolts === |
|||
* [[Image:Fasteners_ISO8674.svg|32px]] '''ISO 8674''' Hexagon high nut with fine pitch thread, style 2. ''Product grades A and B.'' |
|||
* [[Image: |
* [[Image:Fasteners_ASMEB18.2.1.1.svg|32px]] '''ASME B18.2.1.1''' UNC square head bolt. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.5.2.svg|32px]] '''ASME B18.5''' UNC Round head square neck bolt. |
||
* [[Image: |
* [[Image:Fasteners_DIN478.svg|32px]] '''DIN 478''' Square head bolt with collar. |
||
* [[Image: |
* [[Image:Fasteners_DIN603.svg|32px]] '''DIN 603''' Round head square neck bolt. |
||
=== Set screws === |
|||
* [[Image:Fasteners_DIN928.svg|32px]] '''DIN 928''' Square weld nut. |
|||
* [[Image: |
* [[Image:Fasteners_ASMEB18.3.5A.svg|32px]] '''ASME B18.3.5A''' UNC hexagon socket set screw with flat point. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.3.5B.svg|32px]] '''ASME B18.3.5B''' UNC hexagon socket set screw with cone point. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.3.5C.svg|32px]] '''ASME B18.3.5C''' UNC hexagon socket set screw with dog point. |
||
* [[Image: |
* [[Image:Fasteners_ASMEB18.3.5D.svg|32px]] '''ASME B18.3.5D''' UNC hexagon socket set screw with cup point. |
||
* [[Image: |
* [[Image:Fasteners_ISO4026.svg|32px]] '''ISO 4026''' Hexagon socket set screw with flat point. |
||
* [[Image: |
* [[Image:Fasteners_ISO4027.svg|32px]] '''ISO 4027''' Hexagon socket set screw with cone point. |
||
* [[Image: |
* [[Image:Fasteners_ISO4028.svg|32px]] '''ISO 4028''' Hexagon socket set screw with dog point. |
||
* [[Image: |
* [[Image:Fasteners_ISO4029.svg|32px]] '''ISO 4029''' Hexagon socket set screw with cup point. |
||
* [[Image: |
* [[Image:Fasteners_ISO4766.svg|32px]] '''ISO 4766''' Slotted socket set screw with flat point. |
||
* [[Image: |
* [[Image:Fasteners_ISO7434.svg|32px]] '''ISO 7434''' Slotted socket set screw with cone point. |
||
* [[Image: |
* [[Image:Fasteners_ISO7435.svg|32px]] '''ISO 7435''' Slotted socket set screw with long dog point. |
||
* [[Image: |
* [[Image:Fasteners_ISO7436.svg|32px]] '''ISO 7436''' Slotted socket set screw with cup point. |
||
=== Nuts === |
|||
* [[Image:Fasteners_DIN1624.svg|32px]] '''DIN 1624''' Tee nut. |
|||
* [[Image:Fasteners_ASMEB18.2.2.1A.svg|32px]] '''ASME B18.2.2.1A''' UNC hexagon machine screw nut. |
* [[Image:Fasteners_ASMEB18.2.2.1A.svg|32px]] '''ASME B18.2.2.1A''' UNC hexagon machine screw nut. |
||
Line 297: | Line 283: | ||
* [[Image:Fasteners_ASMEB18.6.9A.svg|32px]] '''ASME 18.6.9A''' Wing nut, type A. |
* [[Image:Fasteners_ASMEB18.6.9A.svg|32px]] '''ASME 18.6.9A''' Wing nut, type A. |
||
* [[Image:Fasteners_DIN315.svg|32px]] '''DIN 315''' Wing nut. |
|||
* [[Image:Fasteners_DIN557.svg|32px]] '''DIN 557''' Square nut. |
|||
* [[Image:Fasteners_DIN562.svg|32px]] '''DIN 562''' Square nut. |
|||
* [[Image:Fasteners_DIN917.svg|32px]] '''DIN 917''' Cap nut, low form. |
|||
* [[Image:Fasteners_DIN928.svg|32px]] '''DIN 928''' Square weld nut. |
|||
* [[Image:Fasteners_DIN929.svg|32px]] '''DIN 929''' Hexagon weld nut. |
|||
* [[Image:Fasteners_DIN934.svg|32px]] '''DIN 934 (superseded by ISO 4035 and ISO 8673)''' Hexagon thin nut chamfered. ''Product grades A and B.'' |
|||
* [[Image:Fasteners_DIN935.svg|32px]] '''DIN 935''' Hexagon castle nut. |
|||
* [[Image:Fasteners_DIN985.svg|32px]] '''DIN 985''' Nyloc nut. |
|||
* [[Image:Fasteners_DIN1587.svg|32px]] '''DIN 1587''' Cap nut. |
|||
* [[Image:Fasteners_DIN6330.svg|32px]] '''DIN 6330''' Hexagon nut 1.5d high. |
|||
* [[Image:Fasteners_DIN6331.svg|32px]] '''DIN 6331''' Hexagon with collar 1.5d high. |
|||
* [[Image:Fasteners_DIN6334.svg|32px]] '''DIN 6334''' Hexagon coupling nut. |
|||
* [[Image:Fasteners_DIN7967.svg|32px]] '''DIN 7967''' Self-locking counter nut. |
|||
* [[Image:Fasteners_EN1661.svg|32px]] '''EN 1661''' Hexagon nut with flange. |
|||
* [[Image:Fasteners_GOST11860-1.svg|32px]] '''GOST 11860-1''' Cap nut. |
|||
* [[Image:Fasteners_ISO4032.svg|32px]] '''ISO 4032''' Hexagon nut, style 1. ''Product grades A and B.'' |
|||
* [[Image:Fasteners_ISO4033.svg|32px]] '''ISO 4033''' Hexagon high nut, style 2. ''Product grades A and B.'' |
|||
* [[Image:Fasteners_ISO4034.svg|32px]] '''ISO 4034''' Hexagon nut, style 1. |
|||
* [[Image:Fasteners_ISO4035.svg|32px]] '''ISO 4035''' Hexagon thin nut chamfered, style 0. ''Product grades A and B.'' |
|||
* [[Image:Fasteners_ISO8673.svg|32px]] '''ISO 8673''' Hexagon nut with fine pitch thread, style 1. ''Product grades A and B.'' |
|||
* [[Image:Fasteners_ISO8674.svg|32px]] '''ISO 8674''' Hexagon high nut with fine pitch thread, style 2. ''Product grades A and B.'' |
|||
* [[Image:Fasteners_ISO8675.svg|32px]] '''ISO 8675''' Hexagon thin nut with fine pitch thread, style 0. ''Product grades A and B.'' |
|||
* [[Image:Fasteners_SAEJ483a1.svg|32px]] '''SAE J483a 1''' Low cap nut. |
* [[Image:Fasteners_SAEJ483a1.svg|32px]] '''SAE J483a 1''' Low cap nut. |
||
Line 309: | Line 341: | ||
* [[Image:Fasteners_GN505.4.svg|32px]] '''GN 505.4''' Serrated T-slot bolt. |
* [[Image:Fasteners_GN505.4.svg|32px]] '''GN 505.4''' Serrated T-slot bolt. |
||
* [[Image:Fasteners_GN506.svg|32px]] '''GN 506''' T-Slot swivel nut. |
|||
* [[Image:Fasteners_GN507.svg|32px]] '''GN 507''' T-slot nut. |
* [[Image:Fasteners_GN507.svg|32px]] '''GN 507''' T-slot nut. |
||
* [[Image:Fasteners_ISO299.svg|32px]] '''ISO 299''' T-Slot nut. |
|||
=== Washers === |
=== Washers === |
||
* [[Image:Fasteners_ASMEB18.21.1.12A.svg|32px]] '''ASME B18.21.1.12A''' UN washer, narrow series. |
|||
* [[Image:Fasteners_ASMEB18.21.1.12B.svg|32px]] '''ASME B18.21.1.12B''' UN washer, regular series. |
|||
* [[Image:Fasteners_ASMEB18.21.1.12C.svg|32px]] '''ASME B18.21.1.12C''' UN washer, wide series. |
|||
* [[Image:Fasteners_DIN6319C.svg|32px]] '''DIN 6319C''' Spherical washer. |
|||
* [[Image:Fasteners_DIN6319D.svg|32px]] '''DIN 6319D''' Conical seat. |
|||
* [[Image:Fasteners_DIN6319G.svg|32px]] '''DIN 6319G''' Conical seat. |
|||
* [[Image:Fasteners_DIN6340.svg|32px]] '''DIN 6340''' Washer for clamping devices. |
|||
* [[Image:Fasteners_ISO7089.svg|32px]] '''ISO 7089''' Plain washer, normal series. ''Product grade A.'' |
* [[Image:Fasteners_ISO7089.svg|32px]] '''ISO 7089''' Plain washer, normal series. ''Product grade A.'' |
||
Line 326: | Line 376: | ||
* [[Image:Fasteners_ISO8738.svg|32px]] '''ISO 8738''' Plain washer for clevis pins. |
* [[Image:Fasteners_ISO8738.svg|32px]] '''ISO 8738''' Plain washer for clevis pins. |
||
* [[Image: |
* [[Image:Fasteners_NFE27-619.svg|32px]] '''NFE27-619''' Countersunk washer. |
||
=== Rods, taps and dies === |
|||
* [[Image:Fasteners_DIN6319D.svg|32px]] '''DIN 6319D''' Conical seat. |
|||
* [[Image: |
* [[Image:Fasteners_ScrewTapInch.svg|32px]] Inch threaded rod for tapping holes. |
||
* [[Image: |
* [[Image:Fasteners_ScrewDieInch.svg|32px]] Tool object for cutting external inch threads. |
||
* [[Image: |
* [[Image:Fasteners_ThreadedRodInch.svg|32px]] UNC inch threaded rod. |
||
* [[Image: |
* [[Image:Fasteners_ThreadedRod.svg|32px]] DIN 975 metric threaded rod. |
||
* [[Image: |
* [[Image:Fasteners_ScrewTap.svg|32px]] Metric threaded rod for tapping holes. |
||
* [[Image: |
* [[Image:Fasteners_ScrewDie.svg|32px]] Tool object for cutting external metric threads. |
||
=== Inserts === |
|||
* [[Image:Fasteners_IUTHeatInsert.svg|32px]] Heat staked insert. |
|||
* [[Image:Fasteners_PEMPressNut.svg|32px]] Self-clinching nut. |
|||
* [[Image:Fasteners_PEMStandoff.svg|32px]] Self-clinching standoff. |
|||
* [[Image:Fasteners_PEMStud.svg|32px]] Self-clinching stud. |
|||
* [[Image:Fasteners_PCBSpacer.svg|32px]] PCB spacer female/female. |
|||
* [[Image:Fasteners_PCBStandoff.svg|32px]] PCB standoff female/male. |
|||
* [[Image:Fasteners_4PWTI.svg|32px]] 4 prong threaded wood insert (DIN 1624 Tee nuts). |
|||
=== Retaining rings === |
=== Retaining rings === |
||
Line 350: | Line 416: | ||
* [[Image:Fasteners_DIN6799.svg|32px]] '''DIN 6799''' E-clip retaining ring. |
* [[Image:Fasteners_DIN6799.svg|32px]] '''DIN 6799''' E-clip retaining ring. |
||
=== |
=== Nails === |
||
* [[Image:Fasteners_DIN1160-A.svg|32px]] '''DIN 1160-A''' Clout or slate nail. |
|||
* [[Image:Fasteners_DIN1160-B.svg|32px]] '''DIN 1160-B''' Clout or slate wide head nail. |
|||
=== Pins === |
|||
* [[Image:Fasteners_ISO1234.svg|32px]] '''ISO 1234''' Split pin. |
|||
* [[Image:Fasteners_ISO2338.svg|32px]] '''ISO 2338''' Parallel pin. |
|||
* [[Image:Fasteners_ISO2339.svg|32px]] '''ISO 2339''' Taper pin. |
|||
* [[Image:Fasteners_ISO2340A.svg|32px]] '''ISO 2340A''' Clevis pin. |
|||
* [[Image:Fasteners_ISO2340B.svg|32px]] '''ISO 2340B''' Clevis pin without head (with split pin holes). |
|||
* [[Image:Fasteners_ISO2341A.svg|32px]] '''ISO 2341A''' Clevis pin with head. |
|||
* [[Image:Fasteners_ISO2341B.svg|32px]] '''ISO 2341B''' Clevis pin with head (with split pin hole). |
|||
* [[Image:Fasteners_ISO8733.svg|32px]] '''ISO 8733''' Parallel pin with internal thread, unhardened. |
|||
* [[Image:Fasteners_ISO8734.svg|32px]] '''ISO 8734''' Dowel pin. |
|||
* [[Image:Fasteners_ISO8735.svg|32px]] '''ISO 8735''' Parallel pin with internal thread, hardened. |
|||
* [[Image:Fasteners_ISO8736.svg|32px]] '''ISO 8736''' Taper pin with internal thread, unhardened. |
|||
* [[Image:Fasteners_ISO8737.svg|32px]] '''ISO 8737''' Taper pin with external thread, unhardened. |
|||
* [[Image:Fasteners_ISO8739.svg|32px]] '''ISO 8739''' Full-length grooved pin with pilot. |
|||
* [[Image:Fasteners_ISO8740.svg|32px]] '''ISO 8740''' Full-length grooved pin with chamfer. |
|||
* [[Image:Fasteners_ISO8741.svg|32px]] '''ISO 8741''' Half-length reverse taper grooved pin. |
|||
* [[Image:Fasteners_ISO8742.svg|32px]] '''ISO 8742''' Third-length center grooved pin. |
|||
* [[Image:Fasteners_ISO8743.svg|32px]] '''ISO 8743''' Half-length center grooved pin. |
|||
* [[Image:Fasteners_ISO8744.svg|32px]] '''ISO 8744''' Full-length taper grooved pin. |
|||
* [[Image:Fasteners_ISO8745.svg|32px]] '''ISO 8745''' Half-length taper grooved pin. |
|||
* [[Image:Fasteners_ISO8746.svg|32px]] '''ISO 8746''' Grooved pin with round head. |
|||
* [[Image: |
* [[Image:Fasteners_ISO8747.svg|32px]] '''ISO 8747''' Grooved pin with countersunk head. |
||
* [[Image: |
* [[Image:Fasteners_ISO8748.svg|32px]] '''ISO 8748''' Coiled spring pin, heavy duty. |
||
* [[Image: |
* [[Image:Fasteners_ISO8750.svg|32px]] '''ISO 8750''' Coiled spring pin, standard duty. |
||
* [[Image: |
* [[Image:Fasteners_ISO8751.svg|32px]] '''ISO 8751''' Coiled spring pin, light duty. |
||
* [[Image: |
* [[Image:Fasteners_ISO8752.svg|32px]] '''ISO 8752''' Slotted spring pin, heavy duty. |
||
* [[Image: |
* [[Image:Fasteners_ISO13337.svg|32px]] '''ISO 13337''' Slotted spring pin, light duty. |
||
==References== |
==References== |
Revision as of 21:31, 20 February 2024
Introducción
El Entorno de trabajo Elementos de sujeción es un entorno de trabajo externo que puede agregar varios elementos de sujeción a partes.
El diseño de barra de herramientas única opcional del banco de trabajo.
Los elementos de sujeción con dimensiones métricas tienen íconos naranjas.
Los elementos de sujeción con dimensiones en pulgadas tienen íconos verdes.
Instalación
- Install the Fasteners Workbench via the Addon Manager. For manual installation see Installing more workbenches.
- Restart FreeCAD.
- Select the Fasteners Workbench from the Workbench dropdown list.
- Optionally change the toolbar and menu layout:
- Go to: Edit → Preferences... → Fasteners → General settings.
- Select one of the available Toolbar screw icons grouping options:
- None: All fasteners appear in a single toolbar. To see all available buttons use the >> button to expand it.
- Separate toolbars: Fasteners are grouped in several toolbars. This is the default layout.
- Dropdown buttons: Fasteners are grouped in toolbars with flyouts.
- Optionally uncheck one or more Fastener standards shown in toolbars options. Unchecked standards are still available from the menu.
- Restart FreeCAD.
Uso
Fasteners can be attached or unattached. Attached fasteners have a Datosbase Object, a circular edge, and their DatosPlacement is dynamically linked to that object. The Fasteners Move command can be used to attach or detach a fastener.
Unattached fasteners
- Select the desired fastener by clicking its button or by picking it from the menu.
- A fastener is created at the origin.
- Optionally change the dimensions and other properties of the fastener:
- Select the fastener.
- Go to the Data tab of the Property editor.
- Change the required properties.
Attached fasteners
On the left two selected circular edges. On the right the attached fasteners.
- Specify if the selected holes are tap holes or pass holes by selecting Fasteners MatchTypeInner or Fasteners MatchTypeOuter respectively (not used for countersunk screws).
- Select one or more circular edges and/or faces with circular edges. For countersunk screws the top edge of the chamfered hole must be selected.
- Select the desired fastener by clicking its button or by picking it from the menu.
- A fastener is attached to each of the selected circular edges.
- The default dimensions of each fastener depend on the radius of the circular edge it is attached to. Countersunk screws are matched by their head diameter, other fasteners are matched by their shaft diameter.
- Optionally change the dimensions and other properties of the fasteners. See above.
- Fasteners that appear upside-down can be inverted with the Fasteners Flip command or by changing their Datosinvert property.
- Optionally change the Datosoffset property to create space between the fasteners and the edges they are attached to.
Notas
- To generate threads, the Datosthread property of a fastener must be changed to
true
. Generating threads is costly. Recomputes take much longer if there are many fasteners with threads in a document. - The Datosinvert property and the Datosoffset property are ignored for unattached fasteners.
Commandos
- Invert fastener: Invert the orientation of attached fasteners.
- Move fastener: Move and attach a fastener to a circular edge. Can also be used to detach a fastener.
- Simplify shape: Create non-parametric copies of fasteners.
- Match for tap hole: Consider circular edges to be tap holes when new fasteners are attached to them.
- Match for pass hole: Consider circular edges to be pass holes when new fasteners are attached to them.
- Generate BOM: Create a spreadsheet with a bill of materials for the fasteners in the document.
- Screw calculator: Show a calculator to determine the tap hole size of screws.
- Make countersunk: Chamfer holes for countersunk screws.
- Change fastener parameters: Change the parameters of fasteners.
Elementos de sujeción
Los elementos de sujeción con dimensiones métricas tienen íconos naranjas. Los elementos de sujeción con dimensiones en pulgadas tienen íconos verdes.
Hexagon head screws and bolts
Hexagon socket screws
Hexalobular socket head screws
Slotted head screws
H cross head screws
Other head bolts
Set screws
Nuts
T-slot fasteners
Washers
Rods, taps and dies
Inserts
Retaining rings
Nails
Pins
References
- Author: shaise
- ScrewMaker: Ulrich Brammer
- Workbench wrapper: Shai Seger
- Home page: http://theseger.com/projects/2015/06/fasteners-workbench-for-freecad/
- Source code: https://github.com/shaise/FreeCAD_FastenersWB
- Bug reports and feature requests: https://github.com/shaise/FreeCAD_FastenersWB/issues
- Forum topic: https://forum.freecadweb.org/viewtopic.php?t=11429
Links
- Generating holes for countersunk screws in freecad
- BOLTS: An open library for technical specifications.
- External workbenches
- Macros recipes
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub