Fasteners Flip: Difference between revisions

From FreeCAD Documentation
(Notes added)
("The invert property is deactivated if the selection contains unattached fasteners only": I don't see that, the property can be changed, it is not greyed out, it is just ignored for unattached fasteners. Seems like this duplicates the other remark in the Notes paragraph. I have therefore remove it.)
Line 32: Line 32:
#* Select the {{MenuCommand|Fasteners → [[Image:Fasteners_Flip.svg|16px]] Invert fastener}} option from the menu.
#* Select the {{MenuCommand|Fasteners → [[Image:Fasteners_Flip.svg|16px]] Invert fastener}} option from the menu.
# The orientation of the selected fasteners is inverted.
# The orientation of the selected fasteners is inverted.



==Notes==
==Notes==


* The {{PropertyData|invert}} property is deactivated if the selection contains unattached fasteners only.
* The {{PropertyData|invert}} property is ignored for unattached fasteners in the selection.
* The {{PropertyData|invert}} property is ignored for unattached fasteners in the selection.



Revision as of 13:09, 4 September 2022

Fasteners Flip

Menu location
Fasteners → Invert fastener
Workbenches
Fasteners
Default shortcut
None
Introduced in version
-
See also
None

Description

The Fasteners Flip command inverts the orientation of selected fasteners by changing their Datainvert property.

Usage

  1. Select one or more fasteners.
  2. There are several ways to invoke the command:
    • Press the Fasteners Flip button.
    • Select the Fasteners → Invert fastener option from the menu.
  3. The orientation of the selected fasteners is inverted.

Notes

  • The Datainvert property is ignored for unattached fasteners in the selection.