Draft Line/ru: Difference between revisions
(Updating to match new version of source page) |
(Created page with "== Описание == Инструмент «Линия» создает прямую линию, определяемую двумя точками. Он используе...") |
||
Line 9: | Line 9: | ||
}} |
}} |
||
== Описание == |
|||
==Description== |
|||
Инструмент «Линия» создает прямую линию, определяемую двумя точками. Он использует набор [[Проект Linestyle]] на панели инструментов «Тревожный лоток». Инструмент «Линия» ведет себя точно так же, как инструмент [[Draft Wire]], за исключением того, что он останавливается после двух точек. |
|||
The Line tool creates a straight line defined by two points. It uses the [[Draft Linestyle]] set on the Draft tray toolbar. The Line tool behaves exactly like the [[Draft Wire]] tool, except that it stops after two points. |
|||
[[Image:Draft_Line_example.jpg|400px]] |
[[Image:Draft_Line_example.jpg|400px]] |
Revision as of 10:55, 29 November 2018
Draft Line |
Системное название |
---|
Draft Line |
Расположение в меню |
Черчение → Линия |
Верстаки |
Draft, Arch |
Быстрые клавиши |
L I |
Представлено в версии |
- |
См. также |
Draft Wire |
Описание
Инструмент «Линия» создает прямую линию, определяемую двумя точками. Он использует набор Проект Linestyle на панели инструментов «Тревожный лоток». Инструмент «Линия» ведет себя точно так же, как инструмент Draft Wire, за исключением того, что он останавливается после двух точек.
How to use
- Press the Draft Line button, or press L then I keys
- Click a first point on the 3D view, or type a coordinate
- Click a second point on the 3D view, or type a coordinate
Options
- Press X, Y or Z after the first point to constrain the second point on the given axis.
- To enter coordinates manually, simply enter the numbers, then press ENTER between each X, Y and Z component.
- Press R or click the checkbox to check/uncheck the Relative button. If relative mode is on, the coordinates of the second point are relative to the first one. If not, they are absolute, taken from the (0,0,0) origin point.
- Press T or click the checkbox to check/uncheck the Continue button. If continue mode is on, the Line tool will restart after you give the second point, allowing you to draw another line segment without pressing the Line button again.
- Press CTRL while drawing to force snapping your point to the nearest snap location, independently of the distance.
- Press SHIFT while drawing to constrain your second point horizontally or vertically in relation to the first one.
- Press CTRL+Z or press the Undo button to undo the last point.
- Press ESC or the Cancel button to abort the current Line command.
- If several connected Draft Lines are selected they can be transformed into a wire by pressing the Draft Upgrade Button.
свойства
- ДАННЫЕStart: Начальная точка
- ДАННЫЕEnd: Конечная точка
- ДАННЫЕSubdivisions: Разделяет линию с заданным количеством подразделений introduced in version 0.16
Scripting
The Line tool can be used in macros and from the Python console by using the following function:
Line = makeLine(p1, p2)
Line = makeLine(LineSegment)
Line = makeLine(Shape)
- Creates a
Line
object between pointsp1
andp2
, each defined as aFreeCAD.Vector
- Creates a
Line
object from aPart.LineSegment
- Creates a
Line
object from the first vertex to the last vertex of the givenShape
- The current Draft Linestyle will be used
Example:
import FreeCAD, Draft
Draft.makeLine(FreeCAD.Vector(0,0,0), FreeCAD.Vector(2,0,0))
See also: Draft API, and the autogenerated API documentation https://www.freecadweb.org/api