Combo view/en: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
 
(Updating to match new version of source page)
Line 3: Line 3:
== Introduction ==
== Introduction ==


The [[combo view|combo view]] is a panel found on the left of the screen by default, that holds two tabs for the {{MenuCommand|Model}} and {{MenuCommand|Tasks}}.
The [[combo view|combo view]] is one of the main panels in the FreeCAD interface. It is located on the left side of the screen by default. It is composed of two parts; the upper part has two tabs for the {{MenuCommand|Model}} and {{MenuCommand|Tasks}}; the lower part shows the [[property editor|property editor]], which also displays two tabs for {{MenuCommand|View}} and {{MenuCommand|Data}} properties. The [[property editor|property editor]] is only shown when the {{MenuCommand|Model}} tab is active, that is, when the [[tree view|tree view]] is visible.

Originally the upper part ([[tree view|tree view]]) was separate from the lower part ([[property editor|property editor]]) but then they were combined, and thus the "combo" view was created.

== Upper section ==


The Model tab shows the [[tree view|tree view]], which is a representation of the document's content, including 2D and 3D geometry with their parametric history, but also supporting objects that contain data saved in the document.
The Model tab shows the [[tree view|tree view]], which is a representation of the document's content, including 2D and 3D geometry with their parametric history, but also supporting objects that contain data saved in the document.


The Tasks tab shows the [[task panel|tasks panel]], which will show different actions depending on the active workbench, and the active tool.
The Tasks tab shows the [[task panel|task panel]], which will show different actions depending on the active workbench, and the active tool.

[[File:FreeCAD_Combo_view_Tree_View.png|x600px]] [[File:FreeCAD_Combo_view_Task_panel.png|x600px]]

{{Caption|The combo view has two tabs: the Model tab that controls displaying the [[tree view|tree view]] and the [[property editor|property editor]], and the Tasks tab that controls showing the [[task panel|task panel]].}}

== Lower section ==

The View tab shows visualization properties of the objects, which only affect their appearance in the [[3D view|3D view]]. The Data tab shows the parametric information of the objects, which determines how the geometrical shapes are defined.


[[File:FreeCAD_Tree_view.png]] [[File:FreeCAD_Tasks_panel.png]]
[[File:FreeCAD_Properties_empty.png]]


{{Caption|The two tabs of the combo view; the Model tab that shows the tree view; and the Tasks tab that shows the tasks panel.}}
{{Caption|The lower part of the combo view is the property editor, which shows View and Data properties.}}


{{Interface}}
{{Interface}}

Revision as of 21:28, 27 September 2019

Introduction

The combo view is one of the main panels in the FreeCAD interface. It is located on the left side of the screen by default. It is composed of two parts; the upper part has two tabs for the Model and Tasks; the lower part shows the property editor, which also displays two tabs for View and Data properties. The property editor is only shown when the Model tab is active, that is, when the tree view is visible.

Originally the upper part (tree view) was separate from the lower part (property editor) but then they were combined, and thus the "combo" view was created.

Upper section

The Model tab shows the tree view, which is a representation of the document's content, including 2D and 3D geometry with their parametric history, but also supporting objects that contain data saved in the document.

The Tasks tab shows the task panel, which will show different actions depending on the active workbench, and the active tool.

File:FreeCAD Combo view Tree View.png

The combo view has two tabs: the Model tab that controls displaying the tree view and the property editor, and the Tasks tab that controls showing the task panel.

Lower section

The View tab shows visualization properties of the objects, which only affect their appearance in the 3D view. The Data tab shows the parametric information of the objects, which determines how the geometrical shapes are defined.

File:FreeCAD Properties empty.png

The lower part of the combo view is the property editor, which shows View and Data properties.

Template:Interface