CAM Simulator/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "==Descriere==")
(Created page with "Cet outil permet de simuler le travail de la trajectoire en balayant les modèles 3D des outils utilisés dans chaque opération, le long des chemins de code G, en soustrayant...")
Line 4: Line 4:
==Descriere==
==Descriere==


Cet outil permet de simuler le travail de la trajectoire en balayant les modèles 3D des outils utilisés dans chaque opération, le long des chemins de code G, en soustrayant les matériaux du stock, là où le stock et l'outil se chevauchent, offrant une visualisation du travail. Cela permet de détecter et d'isoler les erreurs avant d'exécuter le travail sur un broyeur.
This tool allows Simulation of the Path Job by sweeping 3D Models of the Tools used in each Operation, along the G-Code paths, subtracting material from the Stock, where the stock and tool overlap, providing visualization of the Job. This allows detection and isolation of errors prior to running the Job on a mill.


[[File:Path-Simulation.gif]]
[[File:Path-Simulation.gif]]

Revision as of 13:16, 29 October 2018

Path Simulator

Menu location
Path → CAM Simulator
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also
Path Inspect

Descriere

Cet outil permet de simuler le travail de la trajectoire en balayant les modèles 3D des outils utilisés dans chaque opération, le long des chemins de code G, en soustrayant les matériaux du stock, là où le stock et l'outil se chevauchent, offrant une visualisation du travail. Cela permet de détecter et d'isoler les erreurs avant d'exécuter le travail sur un broyeur.

Usage

  1. Press the CAM Simulator button
  2. De-select any Operations that are not to be simulated
  3. Tune the Speed and Accuracy settings.
  4. Select the Job for simulation from the drop menu.
  5. Press Play button to or play back an animation of the operations.
    Press the Fast Forward button to make it really fast even for complicated paths.
  6. Pause, and Single-Step functionality is provided for resolving specific cuts or movements.
  7. Clicking the Cancel button will remove the stock created for the simulation. If you click Ok this object will be kept in your Job.

Properties

  1. need usage
  • DatePlayback Speed: The speed of the simulation playback, in G-Code lines/second
  • DateAccuracy: The accuracy of the simulation expressed as a percentage indicating the simulations deviation from the Job. For interactive simulation, reducing accuracy to 0.3 works much faster.
  • DateJob: The Job used as the basis of the simulation
  • DateOperation List: The list of Operations selected for inclusion in the simulation.


  • need options