CAM DressupRampEntry/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "# Selectați un contur sau profil de traiectorie Path objects # Click pe articolul din meniu 16px Path DressupRampEntry|RampE...")
(Created page with "==Proprietăți==")
Line 11: Line 11:
# Click pe articolul din meniu [[Image:Path Dressup.png|16px]] [[Path DressupRampEntry|RampEntry Dress-up]]
# Click pe articolul din meniu [[Image:Path Dressup.png|16px]] [[Path DressupRampEntry|RampEntry Dress-up]]


==Properties==
==Proprietăți==


*'''Ramp Feed Rate''' can either be the current vertical or horizontal feed rate or some other custom value
*'''Ramp Feed Rate''' can either be the current vertical or horizontal feed rate or some other custom value

Revision as of 12:05, 5 November 2018

Path DressupTag

Menu location
Path → Path Dressup → RampEntry Dress-up
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also
Path_DressupTag, Path_DressupDogbone , Path_DressupDragKnife

Descriere

Acest instrument utilizează o cale existentă pentru a adăuga punți/etichete de reținere pe durata așchierii.

Utilizare

  1. Selectați un contur sau profil de traiectorie Path objects
  2. Click pe articolul din meniu RampEntry Dress-up

Proprietăți

  • Ramp Feed Rate can either be the current vertical or horizontal feed rate or some other custom value
  • Angle of the ramp against the vertical axis. A smaller value makes the ramp steeper.
  • Method is used to select different modes of ramping:
    • RampMethod1 goes down at the ramp angle and the moves horizontal to the target point
    • RampMethod2 goes horizontal first and then down at the ramp angle to the target point
    • RampMethod3 goes down in a zigzag way
    • Helix goes down spiraling
  • Dressup Start Depth is the distance above the target level where ramping starts
  • UseStartDepth indicates that the ramping does not start above the stock level. If it is not set to true the first ramp can be steeper than expected.