Advanced TechDraw Tutorial/fr: Difference between revisions
No edit summary |
(Updating to match new version of source page) |
||
Line 20: | Line 20: | ||
Ce tutoriel conduira les utilisateurs avancés à travers les étapes nécessaires pour produire des dessins techniques exigeants de la pièce à partir du [[Basic_Part_Design_Tutorial/fr|Tutoriel d'introduction PartDesign]] en utilisant les outils de dessin de l'atelier TechDraw. |
Ce tutoriel conduira les utilisateurs avancés à travers les étapes nécessaires pour produire des dessins techniques exigeants de la pièce à partir du [[Basic_Part_Design_Tutorial/fr|Tutoriel d'introduction PartDesign]] en utilisant les outils de dessin de l'atelier TechDraw. |
||
<div class="mw-translate-fuzzy"> |
|||
# L'[[Image:Workbench_Draft.svg|24px]] [[Draft_Module/fr|atelier Draft]] (lignes, polylignes, circonférences, arcs, splines, béziers, etc.), en particulier les accrochages, pour créer sur l'objet des "points cosmétiques" réellement précis qui pourront ensuite être utilisés pour le dimensionnement dans TechDraw. |
# L'[[Image:Workbench_Draft.svg|24px]] [[Draft_Module/fr|atelier Draft]] (lignes, polylignes, circonférences, arcs, splines, béziers, etc.), en particulier les accrochages, pour créer sur l'objet des "points cosmétiques" réellement précis qui pourront ensuite être utilisés pour le dimensionnement dans TechDraw. |
||
# Il est également possible d'utiliser l'[[Image:Workbench_Sketcher.svg|24px]] [[Sketcher Workbench/fr|atelier Sketcher]] comme |
# Il est également possible d'utiliser l'[[Image:Workbench_Sketcher.svg|24px]] [[Sketcher Workbench/fr|atelier Sketcher]] comme |
||
Line 27: | Line 28: | ||
# Pour obtenir des sections particulières (coupes sur différents plans ou axes) à présenter sur la page dans TechDraw (il est conseillé d'utiliser une copie de l'objet 3D original), ensuite par la création de plans (même sur différents axes) en utilisant le [[Image:Workfeature_workbench_icon.svg|24px]] WorkFeatureDev, il est possible de sectionner la copie de l'objet 3D [[Image:Part_SliceApart.svg|24px]] ('''''Séparer/exploser''''' fonctionnalité dans l'atelier '''Part''') pour obtenir les faces à convertir en esquisse [[Image:Draft_Draft2Sketch.svg|24px]] ('''''Draft vers Esquisse''''' fonctionnalité dans l'atelier '''Draft''') et ensuite, à travers l'atelier '''Sketcher'', les éditer pour les adapter au dessin technique que l'on souhaite générer dans TechDraw. L'atelier ''WorkFeatureDev'' (et la macro '''workfeature''') sont pleins de fonctions supplémentaires pratiques qui nous permettent de créer facilement des plans (théoriquement infinis en extension et en quantité) en sélectionnant trois points (sommets) ''(rappelez-vous que pour trois points passant, un et un seul plan passe par trois points non alignés un et un seul plan passe par trois points non alignés'') est un axiome géométrique, qui confirme sans aucune ambiguïté (!) la validité et l'importance de l'outil WorkFeatureDev pour créer des plans précis très facilement. |
# Pour obtenir des sections particulières (coupes sur différents plans ou axes) à présenter sur la page dans TechDraw (il est conseillé d'utiliser une copie de l'objet 3D original), ensuite par la création de plans (même sur différents axes) en utilisant le [[Image:Workfeature_workbench_icon.svg|24px]] WorkFeatureDev, il est possible de sectionner la copie de l'objet 3D [[Image:Part_SliceApart.svg|24px]] ('''''Séparer/exploser''''' fonctionnalité dans l'atelier '''Part''') pour obtenir les faces à convertir en esquisse [[Image:Draft_Draft2Sketch.svg|24px]] ('''''Draft vers Esquisse''''' fonctionnalité dans l'atelier '''Draft''') et ensuite, à travers l'atelier '''Sketcher'', les éditer pour les adapter au dessin technique que l'on souhaite générer dans TechDraw. L'atelier ''WorkFeatureDev'' (et la macro '''workfeature''') sont pleins de fonctions supplémentaires pratiques qui nous permettent de créer facilement des plans (théoriquement infinis en extension et en quantité) en sélectionnant trois points (sommets) ''(rappelez-vous que pour trois points passant, un et un seul plan passe par trois points non alignés un et un seul plan passe par trois points non alignés'') est un axiome géométrique, qui confirme sans aucune ambiguïté (!) la validité et l'importance de l'outil WorkFeatureDev pour créer des plans précis très facilement. |
||
(*''Ceci est tout à fait comparable à la commande Slice d'AutoCAD [https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2019/ENU/AutoCAD-Core/files/GUID-27593C5E-4B89-41F2-872B-927D69517CBF-htm.html] qui est basée sur cet axiome. Sans pré-construction d'un nouveau plan, un plan de coupe utilisant trois points est défini.'') |
(*''Ceci est tout à fait comparable à la commande Slice d'AutoCAD [https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2019/ENU/AutoCAD-Core/files/GUID-27593C5E-4B89-41F2-872B-927D69517CBF-htm.html] qui est basée sur cet axiome. Sans pré-construction d'un nouveau plan, un plan de coupe utilisant trois points est défini.'') |
||
</div> |
|||
''Note: These planes can be joined together by overlapping/ coinciding of two edges using the Boolean feature of [[Image:Part_Fuse.svg|24px]] |
''Note: These planes can be joined together by overlapping/ coinciding of two edges using the Boolean feature of [[Image:Part_Fuse.svg|24px]] [[Part_Fuse|Part Union]].'' The planes thus formed and suitably positioned (according to our provisions) will be used as '''cutting blades''' [[Image:Part_SliceApart.svg|24px]] [[Part_SliceApart|Part SliceApart]], cutting our 3D object into several parts according to the chosen planar confirmation.'' |
||
== Before You Begin == |
== Before You Begin == |
||
Line 35: | Line 37: | ||
* [[Image:Workbench_Part.svg|24px]] [[Part_Module|Part Workbench]] |
* [[Image:Workbench_Part.svg|24px]] [[Part_Module|Part Workbench]] |
||
* [[Image:Workbench_Draft.svg|24px]] [[Draft_Module|Draft Workbench]] |
* [[Image:Workbench_Draft.svg|24px]] [[Draft_Module|Draft Workbench]] |
||
* [[Image:Workbench_Sketcher.svg|24px]] [[ |
* [[Image:Workbench_Sketcher.svg|24px]] [[Sketcher_Workbench|Sketcher Workbench]] |
||
* [[Image:Workfeature_workbench_icon.svg|24px]] |
* [[Image:Workfeature_workbench_icon.svg|24px]] [[Workfeature_Workbench|Workfeature Workbench]] |
||
* [[Image:Workbench_TechDraw.svg|24px]] [[ |
* [[Image:Workbench_TechDraw.svg|24px]] [[TechDraw_Workbench|TechDraw Workbench]] |
||
== The Task == |
== The Task == |
||
Line 61: | Line 63: | ||
pay attention to the lines created on the faces that intersect two or more edges, they are seen by TechDraw as separating elements of the face that affect the creation of the fills or patterns. |
pay attention to the lines created on the faces that intersect two or more edges, they are seen by TechDraw as separating elements of the face that affect the creation of the fills or patterns. |
||
This occurs e.g. when creating the outer lines that define the thread of a hole, this line will prevent the fill or pattern from extending further preventing it from arriving on the one that defines the pre-drill hole. In this case it is better to create cosmetic points through construction lines by inserting circles of infinitesimal radius in the vertices that will be seen by TechDraw as cosmetic points and then join them in TechDraw with create cosmetic line by two points.<br> |
This occurs e.g. when creating the outer lines that define the thread of a hole, this line will prevent the fill or pattern from extending further preventing it from arriving on the one that defines the pre-drill hole. In this case it is better to create cosmetic points through construction lines by inserting circles of infinitesimal radius in the vertices that will be seen by TechDraw as cosmetic points and then join them in TechDraw with create cosmetic line by two points.<br> |
||
All lines and / or paths (including cosmetic ones) that are displayed in the views can be edited in the formatting through TechDraw's |
All lines and / or paths (including cosmetic ones) that are displayed in the views can be edited in the formatting through TechDraw's “Change Apparence of selected Lines” command.<br> |
||
To create specific continuous sections on different axes or planes, I used the “WorkFeatureDev” workbench which allows you to create “solid” planes, with a thickness of “0”, by selecting three vertices. These planes can be joined through a common or overlapping edge using the Boolean functions of the “Part” workbench and subsequently used for slicing / sectioning the solid model through the “Slice apart” command of the same workbench. |
To create specific continuous sections on different axes or planes, I used the “WorkFeatureDev” workbench which allows you to create “solid” planes, with a thickness of “0”, by selecting three vertices. These planes can be joined through a common or overlapping edge using the Boolean functions of the “Part” workbench and subsequently used for slicing / sectioning the solid model through the “Slice apart” command of the same workbench. |
||
The faces of the cut objects can be suitably exploited for the creation, with the “Facebinder” function, the “base-sketchTD”s to produce specific section views in TechDraw and therefore to be able to dimension and detail them.<br> |
The faces of the cut objects can be suitably exploited for the creation, with the “Facebinder” function, the “base-sketchTD”s to produce specific section views in TechDraw and therefore to be able to dimension and detail them.<br> |
Revision as of 10:57, 14 August 2021
Tutorial |
Topic |
---|
Modélisation |
Level |
Utilisateur expérimenté |
Time to complete |
Not provided |
Authors |
NormandC |
FreeCAD version |
≥ 0.19.23300 |
Example files |
None |
See also |
None |
L'objectif en bref
Créez des points, des lignes, des cercles, des arcs, etc... dans des vues TechDraw et/ou des dessins "cosmétiques" entiers avec une précision absolue, adaptée aux outils de cotation dont l'établi est équipé, pour générer des dessins techniques conformes et détaillés.
Introduction
Ce tutoriel présente à l'utilisateur expérimenté une utilisation avancée d'outils et de techniques existants dans d'autres ateliers pour étendre les fonctionnalités manquantes dans l'. atelier TechDraw. Ce tutoriel n'est pas un guide complet et exhaustif de l'atelier TechDraw et de nombreux outils et fonctionnalités ne sont pas couverts. Il devrait contribuer à surmonter les difficultés rencontrées pour citer et enrichir le dessin technique à l'aide de TechDraw. Ce tutoriel conduira les utilisateurs avancés à travers les étapes nécessaires pour produire des dessins techniques exigeants de la pièce à partir du Tutoriel d'introduction PartDesign en utilisant les outils de dessin de l'atelier TechDraw.
- L' atelier Draft (lignes, polylignes, circonférences, arcs, splines, béziers, etc.), en particulier les accrochages, pour créer sur l'objet des "points cosmétiques" réellement précis qui pourront ensuite être utilisés pour le dimensionnement dans TechDraw.
- Il est également possible d'utiliser l' atelier Sketcher comme
- générateur de "base-sketchTD" (bases de croquis pour TechDraw) en 2D (par exemple, schéma de système, plans d'étage, élévations, vues de pièces mécaniques ou d'ensemble etc...) ou en
- utilisant directement les croquis qui ont généré les modèles 3D, ou en
- convertissant en esquisse le "facebinder" généré avec l'ébauche obtenue à partir des faces et/ou des sections des modèles 3D.
- Pour obtenir des sections particulières (coupes sur différents plans ou axes) à présenter sur la page dans TechDraw (il est conseillé d'utiliser une copie de l'objet 3D original), ensuite par la création de plans (même sur différents axes) en utilisant le WorkFeatureDev, il est possible de sectionner la copie de l'objet 3D (Séparer/exploser fonctionnalité dans l'atelier Part') pour obtenir les faces à convertir en esquisse (Draft vers Esquisse fonctionnalité dans l'atelier Draft) et ensuite, à travers l'atelier Sketcher, les éditer pour les adapter au dessin technique que l'on souhaite générer dans TechDraw. L'atelier WorkFeatureDev (et la macro workfeature) sont pleins de fonctions supplémentaires pratiques qui nous permettent de créer facilement des plans (théoriquement infinis en extension et en quantité) en sélectionnant trois points (sommets) (rappelez-vous que pour trois points passant, un et un seul plan passe par trois points non alignés un et un seul plan passe par trois points non alignés) est un axiome géométrique, qui confirme sans aucune ambiguïté (!) la validité et l'importance de l'outil WorkFeatureDev pour créer des plans précis très facilement.
(*Ceci est tout à fait comparable à la commande Slice d'AutoCAD [1] qui est basée sur cet axiome. Sans pré-construction d'un nouveau plan, un plan de coupe utilisant trois points est défini.)
Note: These planes can be joined together by overlapping/ coinciding of two edges using the Boolean feature of Part Union. The planes thus formed and suitably positioned (according to our provisions) will be used as cutting blades Part SliceApart, cutting our 3D object into several parts according to the chosen planar confirmation.
Before You Begin
The Workbenches that are used to produce the drawings of the attached examples are:
The Task
Stages of the procedure:
- Creation of the 3D object(s) according to the canons of traditional modeling;
- Possible creation of independent or simple copies, eg. to be used for the creation of specific continuous sections positioned on multiple planes or axes, and which then through the use of the "facebinder", "Draft to Sketch", Shape 2D View, etc. functions. it will allow us to produce perfect “Sketches”, then edit them to make them (by creating ad hoc “cosmetic points or lines”) usable in TechDraw; to these sketches I gave the name of "base-sketchTD";
- insertion / creation of "base-sketchTD" in the layers of belonging (also with "drag and drop");
- creation of the drawing page with its template;
- creation of the view with TechDraw: select the layer or the grouping folder (which contains the “base-sketchTD”) from the structure, then click on the “insert view” button; TechDraw will insert the contents of the layer or grouping folder into the view. For a correct creation "base-sketchTD" must be perpendicular to the monitor / display view; I point out that whatever we add later in the layer or in the grouping-folder, or modifications of the “base-sketchTD”, will be updated in realtime in the TechDraw view. Keep in mind that updates and / or modifications may affect the dimensions already introduced or cosmetic lines created with the specific tool of TechDraw in the view.
- once the “base-sketchTD” has been defined in the view, we can move on to dimensioning with the appropriate TechDraw tools;
It is possible to insert the "base-sketchTD" also in the projection group views:
- select the projection view -> properties tab -> Data -> “Projection” record section -> Source click on the button with the three dots and directly add the “base-sketchTD” or the layer that contains it.
- It should be noted that the "base-sketchTD" must be positioned on the highest face of the model / object, otherwise it will be hidden and will be invisible in TechDraw.
The sections obtained from the views do not seem to have this possibility. Whenever it is necessary to create precise cosmetic points suitable for dimensioning (e.g. tangency points), they can be generated:
- in "Sketcher" through construction lines and inserting circles with infinitesimal diameter / radius (0.00001) in the ends, these will be seen by TechDraw as points / vertices suitable for dimensioning;
- in Draft with the same method to be inserted in the relevant layer or folder-grouping;
- once the "base-sketchTD" has been modified or the Draft object added in the layer or grouping folder, TechDraw will automatically update the view, if this does not happen, update manually with the appropriate command.
To insert section fills or patterns:
pay attention to the lines created on the faces that intersect two or more edges, they are seen by TechDraw as separating elements of the face that affect the creation of the fills or patterns.
This occurs e.g. when creating the outer lines that define the thread of a hole, this line will prevent the fill or pattern from extending further preventing it from arriving on the one that defines the pre-drill hole. In this case it is better to create cosmetic points through construction lines by inserting circles of infinitesimal radius in the vertices that will be seen by TechDraw as cosmetic points and then join them in TechDraw with create cosmetic line by two points.
All lines and / or paths (including cosmetic ones) that are displayed in the views can be edited in the formatting through TechDraw's “Change Apparence of selected Lines” command.
To create specific continuous sections on different axes or planes, I used the “WorkFeatureDev” workbench which allows you to create “solid” planes, with a thickness of “0”, by selecting three vertices. These planes can be joined through a common or overlapping edge using the Boolean functions of the “Part” workbench and subsequently used for slicing / sectioning the solid model through the “Slice apart” command of the same workbench.
The faces of the cut objects can be suitably exploited for the creation, with the “Facebinder” function, the “base-sketchTD”s to produce specific section views in TechDraw and therefore to be able to dimension and detail them.
I believe I have made public every "trick" (or rather system) experimented to be able to use more specific tools (not provided for TechDraw) and create high quality professional technical drawings without any limits, making the TechDraw workbench more efficient and adaptable to any need , in all likelihood on par (if not more flexible and powerful) than commercial peers.
It should be said, which is not negligible, that with this system it is possible to create entire 2D files and quote them with TechDraw in the same way as "LibreCad" or "Autocad LT" or other two-dimensional cads.
I hope I was clear enough (translation permitting) in explaining the procedure ("trick / system") that I believe to be "easier to do than to say", as it is all about being able to enter 2D drawings into the views of TDs created with "Draft" and / or with "Sketcher" simply by selecting them from the structure and creating a view in TD with the appropriate command "create a view"; but I thought of doing something pleasant and more technical by describing the procedure, certainly, in a "simplified" way to create a minimum of organized workflow.
It is up to each of us, with imagination and inventiveness, to optimize it to the maximum to obtain the best result.
I am attaching the files of some workflow examples of technical drawings (not feasible with TechDraw only) from which the images shown below were taken.
In the hope of having been useful, good work and good experimentation!
Notes
Future Outlook
However, the described path could represent the starting point (or the idea) to write additional code to automate the system and integrate it directly into TechDraw with appropriate button / command functions.
Links
- Macro WorkFeatures Wiki page to macro
- FreeCAD WorkFeature Workbench Repository to source code
- TechDraw without limits = Layout autocad Forum Thread
- TechDraw: – come utilizzare gli strumenti Draft/Snaps per creare “ vertici/punti cosmetici” Forum Thread in Italian language
- Pages : Page par défaut, Page à partir d'un modèle, Redessiner une page, Tout imprimer
- Vues : Vue, Vue active, Groupe de projections, Vue en coupe, Vue en coupe complexe, Vue détaillée, Vue d'un objet Draft, Vue d'un objet Arch, Vue d'un objet Spreadsheet, Fenêtre de rognage, Copier une vue, Projection de forme
- Empilement : Empiler en haut, Empiler en bas, Empiler vers le haut, Empiler vers le bas
- Décorations : Hachures par motif, Hachures géométriques, Symbole, Image, Bascule des cadres
- Cotes : Cote de longueur, Cote horizontale, Cote verticale, Cote de rayon, Cote de diamètre, Cote angulaire, Cote angulaire par 3 points, Cote étendue horizontale, Cote étendue verticale, Lier une cote, Infobulle, Cote axonométrique, Cote à partir des points du repère, Réparation des cotes
- Annotations : Annotation, Ligne de référence, Annotation texte enrichi, Point cosmétique, Points médians, Sommets quadrants, Ligne centrale à une face, Ligne centrale entre 2 lignes, Ligne centrale entre 2 points, Ligne cosmétique par 2 points, Cercle cosmétique, Apparence des lignes, Montrer tout, Soudure, Symbole d'état de surface, Tolérance de trou/d'arbre
- Extensions :
- Attributs et modifications : Sélection des attributs, Modification des attributs, Prolonger, Raccourcir, Verrouiller/déverrouiller, Position d'une vue en coupe, Aligner horizontalement, Aligner verticalement, Aligner obliquemement, Cascade horizontale, Cascade verticale, Cascade oblique, Calculer l'aire des faces sélectionnées, Calculer la longueur d'arc d'arêtes sélectionnées, Personnaliser le format d'infobulle
- Lignes centrales, filetage et taraudage : Axes de centrage, Axes de centrage de trous/vis, Corps de taraudage, Taraudage, Corps de filetage, Filetage, Intersection de lignes, Ajouter un sommet décalé, Cercle, Arc, Cercle par 3 points, Ligne parallèle, Ligne perpendiculaire
- Cotes : Cotes horizontales, Cotes verticales, Cotes obliques, Cotes parallèles horizontales, Cotes parallèles verticales, Cotes parallèles obliques, Cote horizontale chanfrein, Cote verticale chanfrein, Longueur d'arc, Diamètre '⌀', Section tube '〼', Supprimer les symboles, Plus de décimales, Moins de décimales
- Exportation : Exporter au format SVG, Exporter au format DXF
- Fonctions supplémentaires : Groupe de lignes, Modèles, Hachures, Dimensionnement géométrique et tolérance, Préférences
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test