Assembly3 Contrainte longueur par ratio
Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.
Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.
Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.
Assembly3 ConstraintLengthRatio |
Menu location |
---|
None |
Workbenches |
Assembly3 |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
Cet outil contraint la longueur d'une ligne 2D comme un segment non fractionné réalisé avec l'établi Draft par rapport à un plan de travail.
It links the length of the 2D line with the length of either another 2D line or a 3D line e.g. a straight edge element or a sketch line.
The length value of the first selected line equals the length value of the second line multiplied by a ratio value.
- (Or the length value of the second selected line equals the length value of the first line divided by a ratio value.)
Usage
- Select two lines, of which at least one should be a 2D line.
- Press the Length ratio button.
- Set the Ratio value in the properties panel.
- Press the Solve constraints or the Quick solve button to recompute
- (if Auto recompute and Smart recompute are disabled).
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test