Assembly3 Contrainte de verrouillage
Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.
Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.
Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.
Assembly3 Contrainte de verrouillage |
Emplacement du menu |
---|
Aucun |
Ateliers |
Assembly3 |
Raccourci par défaut |
Aucun |
Introduit dans la version |
- |
Voir aussi |
Aucun |
Description
This tool links an object to the global coordinate system (GCS) of the assembly using the implicit coordinate system (ICS) of a selected element.
- - If a vertex is selected the coordinates of its ICS are fixed relative to the GCS.
- The object can still rotate around the vertex.
- - If a (straight) edge is selected the coordinates of its ICS and the direction of its z-axis are fixed relative to the GCS.
- The object can still rotate around the edge.
- - If a face is selected the coordinates and the orientation of its ICS are fixed relative to the GCS.
- The object is completely fixed to the GCS.
This can be used to define the fixed set in a static assembly as well as in a kinematic system.
Usage
- Place an object into an assembly.
- Select one element of the object.
- Press the Locked button.
Hub utilisateurs
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test