Macro Airfoil Import & Scale
Popis |
---|
Trace the perimeter of a Airfoil from a .dat file. Version macro : 1.5 , 2.0 and 2.1 Date last modification : 2014-10-02 Autor: quick61 |
Autor |
quick61 |
Download |
None |
Odkazy |
Makro recepty| Jak nainstalovat makra Jak přizpůsobit panely nástrojů |
Verze |
1.5 , 2.0 and 2.1 |
Datum poslední úpravy |
2014-10-02 |
Verze FreeCAD |
None |
Výchozí zástupce |
None |
Viz též |
None |
Popis
Toto makro při spuštění nejprve poskytne uživateli souborový prohlížeč, který vyhledá a vybere textový soubor profilu dat .dat. Po zvolení se zadá délka akordů a po stisknutí tlačítka OK se vytvoří správně měřítko profilu. K dispozici jsou zde dvě verze. Verze 1.5 by měla pracovat na verzích FreeCADu, 0.13 stabilních i všech verzích 0.14. Verze 2 by měla být použita pouze s verzemi FreeCAD rovnajícími se nebo vyššími než 0.14 3077 a bude fungovat nejlépe s verzemi vytvořenými s verzemi OCE / OCC verze 6.7 nebo vyšší.
See also Common Airfoil Data Import
Jak používat - verze 1.5
Vyberte soubor
Spuštění makra nejprve zobrazí uživateli prohlížeč souborů, který vám umožní vybrat požadovaný soubor datového souboru. Projděte si, kam jste uložili soubor profilu, vyberte jej a stiskněte Otevřít.
Zadejte délku chordu
Po výběru souboru profilu se objeví nové dialogové okno s žádostí o délku akordů. Může být zadána libovolná délka, v milimetrech. Po zadání požadované délky vytvoří makro předběžný vodič (DWire) podle bodů popsaných v dříve vybraném souboru profilu .dat v měřítku, které jste zadali pro délku akordy.
Křídlový profil, správně měřítko, by nyní měl být ve vašem projektu připraven k použití.
Jak používat - verze 2
Volba souboru je stejná jako verze 1.5. S verzí 2 máte nyní možnost mít buď výsledný profil vytvořený pomocí DWire nebo Basic Spline (BSpline). Stejně jako u verze 1.5 zadáte požadovanou délku. Dále můžete vybrat, který typ fólie chcete. Stačí kliknout na přepínač BSpline nebo nechat jako výchozí DWire.
Makra
Latest
The lastest version of the macro is to be found at EllipseCenter2Points.FCMacro but the easiest way to install this macro is through the Addon Manager.
Version 1.5
Macro_Airfoil_Import_&_Scale.FCMacro
# # # #
#
# AIRFOIL IMPORT & SCALE v1.5
#
# Imports and scales an Airfoil in the form of a Draft Wire (DWire)
#
# # # #
from PySide import QtCore, QtGui
from PySide.QtGui import QLineEdit
import FreeCAD, FreeCADGui, Draft
import importAirfoilDAT
# Select .dat airfoil data file to be imported
filename = QtGui.QFileDialog.getOpenFileName(QtGui.qApp.activeWindow(),'Open An Airfoil File','*.dat')
class p():
def proceed(self):
try:
# This produces a scaled Airfoil with a DWire
scalefactor=float(self.s1.text())
f1=str(filename)
importAirfoilDAT.insert(f1,"Unnamed")
Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True)
except:
FreeCAD.Console.PrintError("Error, not a valid .dat file\n")
self.close()
def close(self):
self.dialog.hide()
def __init__(self):
self.dialog = None
self.s1 = None
# Make dialog box and get the scale size
self.dialog = QtGui.QDialog()
self.dialog.resize(350,100)
self.dialog.setWindowTitle("Airfoil Import & Scale")
la = QtGui.QVBoxLayout(self.dialog)
t1 = QtGui.QLabel("Chord Length")
la.addWidget(t1)
self.s1 = QtGui.QLineEdit()
la.addWidget(self.s1)
# Add OK / Cancel buttons
#ori okbox = QtGui.QDialogButtonBox(self.dialog)
#ori okbox.setOrientation(QtCore.Qt.Horizontal)
#ori okbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel -PIPE- QtGui.QDialogButtonBox.Ok)
# modify original code for install with addon-install cause -PIPE- 05-12-2016 FC 0.16
okbox = QtGui.QDialogButtonBox(self.dialog)
okbox.setOrientation(QtCore.Qt.Horizontal)
okbox.setStandardButtons(QtGui.QDialogButtonBox.Ok)
cancelbox = QtGui.QDialogButtonBox(self.dialog)
cancelbox.setOrientation(QtCore.Qt.Horizontal)
cancelbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel)
cancelbox.move(0,62)
la.addWidget(okbox)
QtCore.QObject.connect(okbox, QtCore.SIGNAL("accepted()"), self.proceed)
QtCore.QObject.connect(cancelbox, QtCore.SIGNAL("rejected()"), self.close)
QtCore.QMetaObject.connectSlotsByName(self.dialog)
self.dialog.show()
self.dialog.exec_()
p()
Úprava výchozího výběru
Pokud si přejete, aby vaše importované a zmenšené profilové lišty byly vytvořeny s BSplines spíše než s DWires, Marco může být předem nastaven na Bspline. To se provádí úpravou řádku -
##exampleCode## self.radio1.setChecked(True)
- a změnu -
##exampleCode## self.radio2.setChecked(True)
Poznámka k tomuto je obsažena v textu makra.
Version 2
# # # # # # AIRFOIL IMPORT & SCALE v2. # # Imports and scales an Airfoil in the form of a Draft Wire (DWire) or Basic Spline (BSpline) # # For FreeCAD Versions = or > 0.14 Revision 3077 # # Works best with OCC/OCE = or > 6.7 # # # # # from PySide import QtCore, QtGui from PySide.QtGui import QLineEdit, QRadioButton import FreeCAD, FreeCADGui, Draft import importAirfoilDAT # Select .dat airfoil data file to be imported filename = QtGui.QFileDialog.getOpenFileName(QtGui.qApp.activeWindow(),'Open An Airfoil File','*.dat') class p(): def proceed(self): if self.radio1.isChecked(): try: # This produces a scaled Airfoil with a DWire scalefactor=float(self.s1.text()) f1=str(filename) importAirfoilDAT.insert(f1,"Unnamed") Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True) except: FreeCAD.Console.PrintError("Error, not a valid .dat file\n") self.close() if self.radio2.isChecked(): try: # This produces a scaled Airfoil with a BSpline scalefactor=float(self.s1.text()) f1=str(filename) importAirfoilDAT.insert(f1,"Unnamed") points = FreeCAD.ActiveDocument.ActiveObject.Points Draft.makeBSpline(points, closed=True) Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True) App.getDocument("Unnamed").removeObject("DWire") except: FreeCAD.Console.PrintError("Error, not a valid .dat file\n") self.close() def close(self): self.dialog.hide() def __init__(self): self.dialog = None self.s1 = None # Make dialog box and get the scale size self.dialog = QtGui.QDialog() self.dialog.resize(350,100) self.dialog.setWindowTitle("Airfoil Import & Scale") la = QtGui.QVBoxLayout(self.dialog) t1 = QtGui.QLabel("Chord Length") la.addWidget(t1) self.s1 = QtGui.QLineEdit() la.addWidget(self.s1) # Add radio buttons to select between DWire and BSpline self.radio1 = QRadioButton("Make DWire") self.radio2 = QRadioButton("Make BSpline") # set default to DWire & make radio buttons - Change self.radio1.setChecked(True) to # self.radio2.setChecked(True) to set BSpline as default self.radio1.setChecked(True) la.addWidget(self.radio1) la.addWidget(self.radio2) # Add OK / Cancel buttons okbox = QtGui.QDialogButtonBox(self.dialog) okbox.setOrientation(QtCore.Qt.Horizontal) okbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok) la.addWidget(okbox) QtCore.QObject.connect(okbox, QtCore.SIGNAL("accepted()"), self.proceed) QtCore.QObject.connect(okbox, QtCore.SIGNAL("rejected()"), self.close) QtCore.QMetaObject.connectSlotsByName(self.dialog) self.dialog.show() self.dialog.exec_() p()
Version 2.1
Updated by mangtronix to use PySide instead of PyQt (used in older versions of FreeCAD)
# # # # # # AIRFOIL IMPORT & SCALE v2.1 # # Imports and scales an Airfoil in the form of a Draft Wire (DWire) or Basic Spline (BSpline) # # For FreeCAD Versions = or > 0.14 Revision 3703 # # Works best with OCC/OCE = or > 6.7 # # # # # from PySide import QtCore, QtGui from PySide.QtGui import QLineEdit, QRadioButton import FreeCAD, FreeCADGui, Draft import importAirfoilDAT # Select .dat airfoil data file to be imported # PySide returns a tuple (filename, filter) instead of just a string like in PyQt filename, filefilter = QtGui.QFileDialog.getOpenFileName(QtGui.qApp.activeWindow(),'Open An Airfoil File','*.dat') class p(): def proceed(self): global filename if self.radio1.isChecked(): #if True: try: # This produces a scaled Airfoil with a DWire scalefactor=float(self.s1.text()) f1=str(filename) importAirfoilDAT.insert(f1,"Unnamed") Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True) except Exception, e: FreeCAD.Console.PrintError("Error, not a valid .dat file\n") self.close() if self.radio2.isChecked(): try: # This produces a scaled Airfoil with a BSpline scalefactor=float(self.s1.text()) f1=str(filename) importAirfoilDAT.insert(f1,"Unnamed") points = FreeCAD.ActiveDocument.ActiveObject.Points Draft.makeBSpline(points, closed=True) Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True) App.getDocument("Unnamed").removeObject("DWire") except: FreeCAD.Console.PrintError("Error, not a valid .dat file\n") self.close() def close(self): self.dialog.hide() def __init__(self): self.dialog = None self.s1 = None # Make dialog box and get the scale size self.dialog = QtGui.QDialog() self.dialog.resize(350,100) self.dialog.setWindowTitle("Airfoil Import & Scale") la = QtGui.QVBoxLayout(self.dialog) t1 = QtGui.QLabel("Chord Length") la.addWidget(t1) self.s1 = QtGui.QLineEdit() la.addWidget(self.s1) # Add radio buttons to select between DWire and BSpline self.radio1 = QRadioButton("Make DWire") self.radio2 = QRadioButton("Make BSpline") # set default to DWire & make radio buttons - Change self.radio1.setChecked(True) to # self.radio2.setChecked(True) to set BSpline as default self.radio1.setChecked(True) la.addWidget(self.radio1) la.addWidget(self.radio2) # Add OK / Cancel buttons okbox = QtGui.QDialogButtonBox(self.dialog) okbox.setOrientation(QtCore.Qt.Horizontal) okbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok) la.addWidget(okbox) QtCore.QObject.connect(okbox, QtCore.SIGNAL("accepted()"), self.proceed) QtCore.QObject.connect(okbox, QtCore.SIGNAL("rejected()"), self.close) QtCore.QMetaObject.connectSlotsByName(self.dialog) self.dialog.show() self.dialog.exec_() p()
Odkaz
Diskuse o Forum
UIUC Applied Aerodynamics Group Departement of Aerospace Engineering